# MAF Sensor 2001 Nissan Sentra

**URL:** <https://community.cartalk.com/t/maf-sensor-2001-nissan-sentra/36076>\
**Category:** Maintenance/Repairs\
**Tags:** nissan, code, sentra, sensors, 100\
**Created:** [September 3, 2009, 7:41pm UTC](https://community.cartalk.com/t/maf-sensor-2001-nissan-sentra/36076 "2009-09-03T19:41:57Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![AndyB1](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@AndyB1](https://community.cartalk.com/u/AndyB1)\
**Post date:** [September 3, 2009, 7:41pm UTC](https://community.cartalk.com/t/maf-sensor-2001-nissan-sentra/36076/1 "2009-09-03T19:41:57Z")

</div>

I have a 2001 Nissan sentra which will barely idle and will reluctantly drive and not go over 2500 rpm. It has been diagnosed through the scanner (codes) with needing a MAF sensor. I am just wondering if anyone has any related info regarding this problem??? There seems to be a history of this situation after doing some quick searches.

---

<div class="post-metadata">

**Author:** ![bennyandthejets](https://avatars.discourse-cdn.com/v4/letter/b/b487fb/32.png) [@bennyandthejets](https://community.cartalk.com/u/bennyandthejets)\
**Post date:** [September 3, 2009, 7:45pm UTC](https://community.cartalk.com/t/maf-sensor-2001-nissan-sentra/36076/2 "2009-09-03T19:45:11Z")

</div>

You might try to clean the MAF sensor with some sensor safe cleaner. I used brake clean the last time I cleaned one of mine, it fixed my problem, (CEL), however I don’t think it is probably “sensor safe”. Cleaning is a lot cheaper than replacing the sensor, and oftentimes works.

---

<div class="post-metadata">

**Author:** ![AndyB1](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@AndyB1](https://community.cartalk.com/u/AndyB1)\
**Post date:** [September 3, 2009, 7:46pm UTC](https://community.cartalk.com/t/maf-sensor-2001-nissan-sentra/36076/3 "2009-09-03T19:46:01Z")

</div>

Thanks we did try cleaning it and still get the same problem.

---

<div class="post-metadata">

**Author:** ![bennyandthejets](https://avatars.discourse-cdn.com/v4/letter/b/b487fb/32.png) [@bennyandthejets](https://community.cartalk.com/u/bennyandthejets)\
**Post date:** [September 3, 2009, 7:55pm UTC](https://community.cartalk.com/t/maf-sensor-2001-nissan-sentra/36076/4 "2009-09-03T19:55:13Z")

</div>

So much for that idea, (cleaning). Ok then. Many times when you cannot rev the engine very high, it is a clogged cat. I don’t honestly know if a bad MAF sensor will limit the RPM? It might, I just don’t know. Someone else might come on and answer that question. If you recently had a dead hole, where a cylinder wasn’t firing, I’d suspect a plugged cat. Otherwise, maybe bad MaF?

---

<div class="post-metadata">

**Author:** ![AndyB1](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@AndyB1](https://community.cartalk.com/u/AndyB1)\
**Post date:** [September 8, 2009, 9:03pm UTC](https://community.cartalk.com/t/maf-sensor-2001-nissan-sentra/36076/5 "2009-09-08T21:03:34Z")

</div>

ok so back again I am - Changed MAF reset code 100 - instantly trips same code and car will idle fine but will hesitate and bog above 2000 rpm… any other ideas???I would greatly appreciate it…
