# LTFT Bank 2 High

**URL:** <https://community.cartalk.com/t/ltft-bank-2-high/155269>\
**Category:** Maintenance/Repairs\
**Created:** [December 24, 2019, 4:47pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269 "2019-12-24T16:47:28Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [December 29, 2019, 10:41pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/41 "2019-12-29T22:41:50Z")

</div>

I am not sure if you saw the results shared.

The C1 test revealed a 25 psi improvement from compression test vs after adding oil to cylinder and red testing. So that is significant improvement.  
190 psi to 215 psi…

However what is odd is the same text in Cylinder 5 was almost exactly the same… 190 psi to 210 psi.  
This was 20 psi improvement…

The oddity is C5 has no misfires and runs great.  
Can just 5 psi make that much difference?

Last I did use RESTORE in the summer oil change. Honestly I thought is cleared up the misfires as CEL stopped coming on for several months… but then we experienced the stall no crank issue. I change oil again in November and did not use RESTORE this time… so I am baffled …

I am always hearing about not being a parts changer… to diagnose it before changing a part…  
well that’s all dandy for a hard failure like a vacuum leak, or low fuel pressure, or a hard fault code like P0171, or when Fuel Trims follow a pattern perfectly… but my issue is none of those… and nothing stands out being abnormal… I have eliminated everything except a computer or rebuilding the engine…

Believe it or not I actually have a spare ECU I bought from a scrap yard and had a guy configure it with my VIN number… I am nervous about swapping it out… I know when I do a relearn will be required…

I guess I just had bad luck… before I spend $400 having heads rebuilt and machine shop and replacing it all myself. The would like to know if it’s worth it? I would hate to get to trying everything, having a perfect top of engine, only to realize I need a lower engine rebuild or new engine…

---

<div class="post-metadata">

**Author:** ![thegreendrag0n](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/thegreendrag0n/32/9265_2.png) [@thegreendrag0n](https://community.cartalk.com/u/thegreendrag0n)\
**Post date:** [December 29, 2019, 10:49pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/42 "2019-12-29T22:49:44Z")

</div>

I did see C1 stands out at 25 psi difference, but I missed that C5 has 20 psi diff.

Every time you replace oil, Restore’ effect is gone, so if you tell it helped before, I would dump a bottle into the oil, even if it is not exactly fresh

Restore would definitely have nothing to do with “stall / no crank”

How is your effort to clean/swap injectors going?

Do not make too many changes in one round, it makes it harder to diagnose.  
I would not go ECU route until you have injectors sorted.

---

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [December 29, 2019, 11:10pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/43 "2019-12-29T23:10:47Z")

</div>

I did not tackle that yet. I ordered a tool kit to connect injectors and spray/clean them. This week I will clean my old original OEM injectors and if the spray patters look good I will replace them…

---

<div class="post-metadata">

**Author:** ![thegreendrag0n](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/thegreendrag0n/32/9265_2.png) [@thegreendrag0n](https://community.cartalk.com/u/thegreendrag0n)\
**Post date:** [December 29, 2019, 11:12pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/44 "2019-12-29T23:12:58Z")

</div>

I would bet once you clean and install your original injectors, your problem will be resolved 🙂

---

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [December 29, 2019, 11:27pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/45 "2019-12-29T23:27:23Z")

</div>

Thanks… I hope so… but I am not giving up!!

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 30, 2019, 12:02am UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/46 "2019-12-30T00:02:56Z")

</div>

I doubt those compression results are the reason for the symptom you are having. While a little less balanced than might be desired, those seem within the normal range of cylinder to cylinder variations to me. I think the specs on my truck’s 302 are only that all the compressions must measure within 25% of each other. There’s no absolute minimum compression number spec’d.

---

<div class="post-metadata">

**Author:** ![circuitsmith](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/circuitsmith/32/40376_2.png) [@circuitsmith](https://community.cartalk.com/u/circuitsmith)\
**Post date:** [December 30, 2019, 12:11am UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/47 "2019-12-30T00:11:18Z")

</div>

Compression is not your problem.  
With 235k miles 190+ dry compression is just fine.  
You’re not gonna get misfires until compression drops well below 150.

If the CEL doesn’t come on, and driveability and fuel efficiency are reasonable, I suggest you drive on and get your money’s worth out of the old girl.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [December 30, 2019, 12:49am UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/48 "2019-12-30T00:49:03Z")

</div>

OP, do you actually notice some misfiring when driving? Maybe it actually isn’t misfiring, & the misfiring code is due to some problem with the way the computer determines a misfire. The way it usually does it is w/the crank sensor. The computer knows when the spark plug is fired, and it times the crank sensor to see if the spark event accelerates the crankshaft or not. If not then it flags a misfire code. You say you’ve replaced the crank sensor, but there’s always the possibility the new crank sensor is faulty, the crank signal isn’t getting to the computer cleanly, or that the grating the crank sensor senses is the problem.

---

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [December 30, 2019, 5:37am UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/49 "2019-12-30T05:37:13Z")

</div>

I replaced crank sensor 1 year ago as a possibility it was causing misfire issues as described. 1 month ago it started having stalk/no crank which led me to start this blog. Fix could be fuel pressure or CPS. I replaced both. I add the .020 shim to COS that was suggested due to bearing wear and gap issues. I hade engine light misfires (no CPS code) but had relearn done anyway…

Since then 2 weeks it does not stall but still misfires at idle or very low speeds. When faster speeds it runs fine with no misfires.

I am sure it’s not the sensor… but maybe the reluctor wheel has an issue…

Worst case I will ride her til she dies…

---

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [January 3, 2020, 9:39pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/50 "2020-01-03T21:39:41Z")

</div>

Update:

Took a couple days off. I have a injector tester but need to by some spray cleaner. In addition I did do a Chemical Block Test. Fluid remained blue and nothing indicated any exhaust gases getting into coolant. Just another piece of info.

George thinking about your question on CPS I can confirm the misfire is real because I can hear/ feel it at idle. So it’s not a ghost code from reluctor /CPS miss. It’s not bad lately so not too concerned. Still have not swapped injector but am testing old ones first…

I want to do the injector balance test but do not have a scanner to initiate. I am thinking to connect fuel pressure gauge and record value after disconnecting an injector connector and repeat for all… hope this works?

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [January 4, 2020, 2:00am UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/51 "2020-01-04T02:00:18Z")

</div>

> [@glennst1011\_160276](#):
>
> I want to do the injector balance test but do not have a scanner to initiate. I am thinking to connect fuel pressure gauge and record value after disconnecting an injector connector and repeat for all… hope this works?

No, it won’t work, but this will, in conjunction with that fuel pressure gauge you mentioned

![image](https://global.discourse-cdn.com/cartalk/original/3X/b/1/b1a1d577f742636531a8c2b69ef0c6ed812cefbd.jpeg)

---

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [January 4, 2020, 1:52pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/52 "2020-01-04T13:52:13Z")

</div>

Ok I ordered this…

> **[Amazon.com: ALLOSUN EM276 Fuel Injector Tester: Automotive](https://www.amazon.com/ALLOSUN-EM276-Fuel-Injector-Tester/dp/B0126MEK3C/ref=redir_mobile_desktop/143-8968192-0807315?_encoding=UTF8&ref=ppx_pt2_mob_b_prod_image)**
>
> Buy ALLOSUN EM276 Fuel Injector Tester: Seal Kits - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [January 4, 2020, 3:52pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/53 "2020-01-04T15:52:29Z")

</div>

That looks good . . . but you’ll almost certainly have to make your own adapter(s), as some of the reviewers did

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [January 4, 2020, 3:55pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/54 "2020-01-04T15:55:12Z")

</div>

After you’ve done the test, please inform us of the results

The pressure when the system is primed

The pressure after each injector is individually buzzed

If one injector is not flowing enough, or flowing too much, it’ll be evident

---

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [January 4, 2020, 6:33pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/55 "2020-01-04T18:33:55Z")

</div>

Will do… the tool arrives tomorrow… it may be next weekend before I test. In addition to above results I will also test the resistance (ohms) I each one as well.

---

<div class="post-metadata">

**Author:** ![thegreendrag0n](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/thegreendrag0n/32/9265_2.png) [@thegreendrag0n](https://community.cartalk.com/u/thegreendrag0n)\
**Post date:** [January 4, 2020, 8:28pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/56 "2020-01-04T20:28:15Z")

</div>

Looks like Eric O came out with video directly related to your problem:

---

<div class="post-metadata">

**Author:** ![Cougar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cougar/32/21348_2.png) [@Cougar](https://community.cartalk.com/u/Cougar)\
**Post date:** [January 4, 2020, 11:43pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/57 "2020-01-04T23:43:23Z")

</div>

I’m not surprised Eric traced the issue to a faulty injector. I think that is what is going on with this case also. I have previously watched other videos from Eric. I like the way he works and he makes some good videos to help others.

---

<div class="post-metadata">

**Author:** ![thegreendrag0n](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/thegreendrag0n/32/9265_2.png) [@thegreendrag0n](https://community.cartalk.com/u/thegreendrag0n)\
**Post date:** [January 5, 2020, 12:03am UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/58 "2020-01-05T00:03:52Z")

</div>

Eric now has another handy YouTuber neighbor Ivan, who takes upon quite complex projects:

> **[Pine Hollow Auto Diagnostics](https://www.youtube.com/channel/UCn4Ifss-t3wMT6VBzQoKPUA)**
>
> This is the official channel for Pine Hollow Auto Diagnostics, based in State College, PA. Applying the scientific method and basic principles to automotive ...

I like watching his diagnostic video-reports too

---

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [January 11, 2020, 6:35pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/59 "2020-01-11T18:35:30Z")

</div>

UPDATE: 01/11/2020

I just tested the fuel injectors. I tested resistance of injector as well as the pressure drop flow rate (or whatever it’s called)…

Remember I am getting a P301 or P300 code and am seeing most misses at idle on 1 and a few on 2.

Resistance in ohms. I did notice I would get .1 ohms movement depending on how firm or where on probe tip I held wire. I tried to record the peak number seen on meter that was stable.

#1 = 13.6 #2 = 13.4  
#3 = 13.5 #4 = 13.4  
#5 = 13.5 #6 = 13.4  
#7 = 13.5 #8 = 13.4

Below are the pressure readings when using the OLLOSUN EM267 pulse meter. Setting on mode 2 medium pulse. Before each test I turned on pump to maximize pressure on rail. In most all instances starting pressure was 45 PSI.

#1 Start 45, End 24, Drop = 21  
#3 Start 45, End 24, Drop = 21  
#5 Start 45, End 25, Drop = 20  
#7 Start 45, End 25, Drop = 20

#2 Start 45, End 22, Drop = 23  
#4 Start 45, End 23, Drop = 22  
#6 Start 46, End 24, Drop = 22  
#8 Start 46, End 24, Drop = 22

Attached of pic. I won’t let me prove video…

 ![image](https://global.discourse-cdn.com/cartalk/original/3X/9/0/9063d5429389c7fd4bd9a19a7f15ac9e74302cb0.jpeg)

---

<div class="post-metadata">

**Author:** ![glennst1011\_160276](https://avatars.discourse-cdn.com/v4/letter/g/8baadc/32.png) [@glennst1011\_160276](https://community.cartalk.com/u/glennst1011_160276)\
**Post date:** [January 11, 2020, 6:44pm UTC](https://community.cartalk.com/t/ltft-bank-2-high/155269/60 "2020-01-11T18:44:11Z")

</div>

I addition I am not sure if it’s normal but after the pulse was initiated and pressure dropped and letting it sit a minute (I noticed this between moving the connector to next injector) that the pressure gauge climbed slightly. For example #4 dropped to 23, but after a minute it read 26. (Pic attached). This wS noticed to occur on all bank 2 injectors. I did not pay attention on bank 1 which I tested first.

 ![image](https://global.discourse-cdn.com/cartalk/original/3X/0/b/0b41991a724235809c2d8d40cadd9a1f86ab66ad.jpeg)

[Previous page](https://community.cartalk.com/t/ltft-bank-2-high/155269.md?page=2)

[Next page](https://community.cartalk.com/t/ltft-bank-2-high/155269.md?page=4)
