# Looking to change cars **URL:** \ **Category:** Buying/Selling\ **Created:** [February 21, 2026, 2:16am UTC](https://community.cartalk.com/t/looking-to-change-cars/205216 "2026-02-21T02:16:49Z")\ **Posts on this page:** 1\ **Showing post:** 23
**Author:** ![LoudThunder](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/loudthunder/32/27769_2.png) [@LoudThunder](https://community.cartalk.com/u/LoudThunder)\ **Post date:** [February 22, 2026, 12:45am UTC](https://community.cartalk.com/t/looking-to-change-cars/205216/23 "2026-02-22T00:45:24Z")
> [@davesmopar](#): > > They still only adjust so high stock, This old posting dealt with me fabricating blocks to raise the passenger side seat in my 2019 Toyota. > [@Do car seat heights mostly stay constant within a model year?](https://community.cartalk.com/t/do-car-seat-heights-mostly-stay-constant-within-a-model-year/187445/10): > > This recollection dates back to the cars of the '50s and '60s. I do not remember which makes or models of cars that had adjustable level and height adjustments. I but I do remember making adjustments on some of them. As I remember, the bench seats were mounted to the frame installed rails by four bolts, two on each side. The rails, mounted to the floor boards had three mounting holes, front and rear. By adjusting which hole the bolt went through, you could raise or lower the seat front or b… At the time, there was no dealer supplied or after-market products available… The original seat bolts were too short for the added height, I ordered replacements bolts (Grade 8) from Fastenal. Afterwards, she did not feel like Lily Tomlin’s little girl character “Edith Ann” who sits in an oversize chair anymore… [![](https://global.discourse-cdn.com/cartalk/original/3X/c/a/ca60dfb8c4a5227d2484c8403012e43e239f0857.jpeg "Most Popular Edith Ann Moments | ROWAN & MARTIN'S LAUGH-IN") ](https://www.youtube.com/watch?v=GIaydiPi-zY) --- _[View the full topic](https://community.cartalk.com/t/looking-to-change-cars/205216)._