# Lesabre rattling noise

**URL:** <https://community.cartalk.com/t/lesabre-rattling-noise/194884>\
**Category:** Maintenance/Repairs\
**Tags:** lesabre, buick\
**Created:** [May 11, 2024, 10:43am UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884 "2024-05-11T10:43:40Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![davesmopar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/davesmopar/32/41750_2.png) [@davesmopar](https://community.cartalk.com/u/davesmopar)\
**Post date:** [May 15, 2024, 7:04am UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/21 "2024-05-15T07:04:08Z")

</div>

What you are describing really sounds like a bad tensioner assembly (as mentioned above), look at the tensioner while the vehicle is making noise to see if it is smooth or jumping around any (like it is moving from loose to tight back to loose back to tight very quickly)… but pretty smooth when not making noise…

If you have a 1/2" drive impact gun, put a socket on it and spin the alt really fast to see if it makes noise, you may have bearings going bad in it… You might have to remove it for access to the pulley nut, or get creative with a universal joint adapter (impact preferred but standard will work, best if it has a few rounds of electrical tape around it to stiffen it up)…

---

<div class="post-metadata">

**Author:** ![knocksensor](https://avatars.discourse-cdn.com/v4/letter/k/97f17d/32.png) [@knocksensor](https://community.cartalk.com/u/knocksensor)\
**Post date:** [May 15, 2024, 12:55pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/22 "2024-05-15T12:55:51Z")

</div>

I do not have a impact but I’ll check on the tensioner assembly part as you said. Thanks.

As I was thinking of the pain of changing a belt the thought of a tensioner breaking causing a broken belt sounds pretty shitty.

---

<div class="post-metadata">

**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\
**Post date:** [May 15, 2024, 12:58pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/23 "2024-05-15T12:58:08Z")

</div>

Can you run the engine for a very short period without any belts? If no rattle it’s something turned by the belt.

---

<div class="post-metadata">

**Author:** ![davesmopar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/davesmopar/32/41750_2.png) [@davesmopar](https://community.cartalk.com/u/davesmopar)\
**Post date:** [May 15, 2024, 1:27pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/24 "2024-05-15T13:27:35Z")

</div>

> [@knocksensor](#):
>
> I do not have a impact

Does your mechanic friend, if not get some/a 1/4" hex shank socket driver(s) and chuck it up in your drill and spin up the alt…

Harbor Freight has them for a few $…

 ![](https://global.discourse-cdn.com/cartalk/original/3X/6/1/611171e9078f0f7ba39dee27e19dde1fcadf1263.jpeg)  
Let us know what that tensioner looks like…  
If it is the tensioner, those are a bit of a PIA… lol

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [May 15, 2024, 4:03pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/25 "2024-05-15T16:03:14Z")

</div>

> [@texases](#):
>
> Can you run the engine for a very short period without any belts? If no rattle it’s something turned by the belt.

That was established above.

> [@knocksensor](#):
>
> Thank you Davesmopar. I ran w belt off not a noise at all. Put back on had the noise back. At least now I know it’s not in the motor.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [May 15, 2024, 9:22pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/26 "2024-05-15T21:22:56Z")

</div>

> [@knocksensor](#):
>
> As for the belt why would they design a belt that a engine mount would need to be removed to change a belt?

Are you sure the entire mount has to be removed? I’d expect all that’s necessary is just the mount’s “through bolt”, which holds the body part of the mount to the engine part. Removing the front-mount through bolt is a relatively easy job on my Corolla, maybe 15 minutes. A little jacking is needed on the engine beforehand of course.

---

<div class="post-metadata">

**Author:** ![VOLVO-V70](https://avatars.discourse-cdn.com/v4/letter/v/8e8cbc/32.png) [@VOLVO-V70](https://community.cartalk.com/u/VOLVO-V70)\
**Post date:** [May 15, 2024, 9:34pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/27 "2024-05-15T21:34:21Z")

</div>

Not sure how knowing how to change a belt on an old Corolla will help with this person’s LeSabre.

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [May 16, 2024, 4:06am UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/28 "2024-05-16T04:06:32Z")

</div>

> [@knocksensor](#):
>
> As for the belt why would they design a belt that a engine mount would need to be removed to change a belt?

Autos are designed largely for efficiency at the assembly plant. Not for maintenance or repairs.

---

<div class="post-metadata">

**Author:** ![davesmopar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/davesmopar/32/41750_2.png) [@davesmopar](https://community.cartalk.com/u/davesmopar)\
**Post date:** [May 16, 2024, 5:47am UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/29 "2024-05-16T05:47:32Z")

</div>

Still way better than the old 3,4,5 V belt set up where you had to pry the alt to tighten the belt, to tight and you can burn up the bearings, to loose and it will squeal, some of the PS pump belt adjustments were just stupid, not to mention some pulleys ran 2 belts and some only one, and all the belts were different lengths, no thank you, I will move a motor mount for a serp belt with auto tensioner…

---

<div class="post-metadata">

**Author:** ![knocksensor](https://avatars.discourse-cdn.com/v4/letter/k/97f17d/32.png) [@knocksensor](https://community.cartalk.com/u/knocksensor)\
**Post date:** [May 16, 2024, 4:53pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/30 "2024-05-16T16:53:24Z")

</div>

I stopped by a service shop and asked the guy to take a quick look. He says tensioner assembly is going bad. Easy fix I assume.

---

<div class="post-metadata">

**Author:** ![davesmopar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/davesmopar/32/41750_2.png) [@davesmopar](https://community.cartalk.com/u/davesmopar)\
**Post date:** [May 16, 2024, 4:59pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/31 "2024-05-16T16:59:05Z")

</div>

> [@knocksensor](#):
>
> Easy fix I assume.

Flat rate is 1.5 hours…

 ![](https://global.discourse-cdn.com/cartalk/original/3X/1/4/1401209a513946d763d5c0c291e6ecfac6a71f3c.jpeg)

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [May 16, 2024, 6:38pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/32 "2024-05-16T18:38:53Z")

</div>

More involved than many. I’m not a mechanic, so maybe it’s not all that uncommon. But I was surprised when I looked up the tensioner and saw the cooling connections. Weird.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [May 16, 2024, 6:55pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/33 "2024-05-16T18:55:14Z")

</div>

> [@cigroller](#):
>
> But I was surprised when I looked up the tensioner and saw the cooling connections. Weird.

That’s how the connections are made to the heater core.

Tester

---

<div class="post-metadata">

**Author:** ![knocksensor](https://avatars.discourse-cdn.com/v4/letter/k/97f17d/32.png) [@knocksensor](https://community.cartalk.com/u/knocksensor)\
**Post date:** [May 16, 2024, 11:47pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/34 "2024-05-16T23:47:31Z")

</div>

Agree on the weird setup. I was surprised to see the heater core hoses part of it.

---

<div class="post-metadata">

**Author:** ![nofyfb\_180405](https://avatars.discourse-cdn.com/v4/letter/n/22d042/32.png) [@nofyfb\_180405](https://community.cartalk.com/u/nofyfb_180405)\
**Post date:** [May 17, 2024, 1:49am UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/35 "2024-05-17T01:49:08Z")

</div>

Three words in no particular order: buick, harmonic, balancer.

---

<div class="post-metadata">

**Author:** ![davesmopar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/davesmopar/32/41750_2.png) [@davesmopar](https://community.cartalk.com/u/davesmopar)\
**Post date:** [May 17, 2024, 5:19am UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/36 "2024-05-17T05:19:50Z")

</div>

> [@nofyfb\_180405](#):
>
> harmonic, balancer.

That was posted 5 days ago…

> [@davesmopar](#):
>
> Also check your harmonic balancer (vibration damper) to make sure it is not coming apart or wobbling…

---

<div class="post-metadata">

**Author:** ![Jerome-Silverman](https://avatars.discourse-cdn.com/v4/letter/j/71e660/32.png) [@Jerome-Silverman](https://community.cartalk.com/u/Jerome-Silverman)\
**Post date:** [May 17, 2024, 10:28pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/37 "2024-05-17T22:28:51Z")

</div>

Some alternators have an overrunning clutch and they can get noisy.

---

<div class="post-metadata">

**Author:** ![cigroller](https://avatars.discourse-cdn.com/v4/letter/c/c68b51/32.png) [@cigroller](https://community.cartalk.com/u/cigroller)\
**Post date:** [May 17, 2024, 11:07pm UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/38 "2024-05-17T23:07:45Z")

</div>

> [@Jerome-Silverman](#):
>
> Some alternators have an overrunning clutch and they can get noisy

It seems the question has likely been answered:

> [@knocksensor](#):
>
> I stopped by a service shop and asked the guy to take a quick look. He says tensioner assembly is going bad. Easy fix I assume.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [May 18, 2024, 1:11am UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/39 "2024-05-18T01:11:25Z")

</div>

> [@Jerome-Silverman](#):
>
> Some alternators have an overrunning clutch and they can get noisy.

OP’s car is way too old to have that

---

<div class="post-metadata">

**Author:** ![knocksensor](https://avatars.discourse-cdn.com/v4/letter/k/97f17d/32.png) [@knocksensor](https://community.cartalk.com/u/knocksensor)\
**Post date:** [May 20, 2024, 12:20am UTC](https://community.cartalk.com/t/lesabre-rattling-noise/194884/40 "2024-05-20T00:20:35Z")

</div>

I should be picking up a bracket soon.

[Previous page](https://community.cartalk.com/t/lesabre-rattling-noise/194884.md?page=1)

[Next page](https://community.cartalk.com/t/lesabre-rattling-noise/194884.md?page=3)
