# Knocking noise when deccelerating

**URL:** <https://community.cartalk.com/t/knocking-noise-when-deccelerating/47226>\
**Category:** Maintenance/Repairs\
**Tags:** chrysler, lebaron\
**Created:** [April 10, 2010, 3:14am UTC](https://community.cartalk.com/t/knocking-noise-when-deccelerating/47226 "2010-04-10T03:14:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![punkitty1977](https://avatars.discourse-cdn.com/v4/letter/p/839c29/32.png) [@punkitty1977](https://community.cartalk.com/u/punkitty1977)\
**Post date:** [April 10, 2010, 3:14am UTC](https://community.cartalk.com/t/knocking-noise-when-deccelerating/47226/1 "2010-04-10T03:14:11Z")

</div>

I was driving my 1988 Chrysler LeBaron on the freeway today and after about 35 minutes of driving my car starting making a knocking noise when I took my foot off the gas pedal. If I accelerated or braked the noise would go away, but the second I was coasting the knocking would start again. I naturally pulled off the road IMMEDIATELY and killed the engine. I examined under the hood for anything out of the ordinary, but I know little about cars and didn’t see anything obviously wrong. I did notice that I was leaking a little bit of transmission fluid and was able to pinpoint the source of the leak to a hole in the hose connecting the transmission to the radiator. I will obviously be replacing the faulty hose, but can leaking transmission fluid be the reason for the knocking noise, or is something else potentially wrong?

---

<div class="post-metadata">

**Author:** ![missileman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/missileman/32/1366_2.png) [@missileman](https://community.cartalk.com/u/missileman)\
**Post date:** [April 10, 2010, 6:48pm UTC](https://community.cartalk.com/t/knocking-noise-when-deccelerating/47226/2 "2010-04-10T18:48:59Z")

</div>

Have your vehicle front end checked out. The motor mounts on this vehicle are suspect as well as the CV joints. They often knock under decceleration as it puts a load on the component.
