# Jeep Wrangler, 2003 Sport; 4 wheel drive linkage missing \_could my mechanic have caused this?

**URL:** <https://community.cartalk.com/t/jeep-wrangler-2003-sport-4-wheel-drive-linkage-missing--could-my-mechanic-have-caused-this/83342>\
**Category:** Maintenance/Repairs\
**Tags:** wrangler, jeep\
**Created:** [January 25, 2014, 8:48pm UTC](https://community.cartalk.com/t/jeep-wrangler-2003-sport-4-wheel-drive-linkage-missing--could-my-mechanic-have-caused-this/83342 "2014-01-25T20:48:56Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MissyNPS](https://avatars.discourse-cdn.com/v4/letter/m/7ab992/32.png) [@MissyNPS](https://community.cartalk.com/u/MissyNPS)\
**Post date:** [January 25, 2014, 8:48pm UTC](https://community.cartalk.com/t/jeep-wrangler-2003-sport-4-wheel-drive-linkage-missing--could-my-mechanic-have-caused-this/83342/1 "2014-01-25T20:48:56Z")

</div>

So, last year, I needed to have the clutch replaced in my wrangler. There was one part that needed to be replaced, which was on back-order for some time, but I finally got it back after about 2 months, with a new clutch. Just last month, I was returning from visiting my Dad out in the suburbs and it was snowing so I pulled over and I tried to engage my 4-wheel drive using the separate 4WD lever. When I pulled up on the lever, there was no tension in it at all and the 4WD would not engage. This is over 8 months after the clutch was replaced, but the first time that I needed to use the 4-wheel drive since I got it back (as far as I can remember?). My question is, is this something that could have happened while the clutch was being replaced? There was never a time when I tried to use the 4WD and it didn’t feel like it broke or anything weird happened when I pulled up on the lever. So I’m wondering if the mechanic just didn’t put this part back on - or even if it has to be taken apart at all during replacement of the clutch. ??

---

<div class="post-metadata">

**Author:** ![strickerj](https://avatars.discourse-cdn.com/v4/letter/s/9d8465/32.png) [@strickerj](https://community.cartalk.com/u/strickerj)\
**Post date:** [January 25, 2014, 10:23pm UTC](https://community.cartalk.com/t/jeep-wrangler-2003-sport-4-wheel-drive-linkage-missing--could-my-mechanic-have-caused-this/83342/2 "2014-01-25T22:23:27Z")

</div>

I don’t have any experience with the last-gen Wranglers, but on my JK, there’s a little plastic bushing between the shifter fork and the cable linkage that’s prone to breaking or popping off, resulting in the symptoms you describe. I bought 4 spares (at about 50 cents each) just in case it happens on the trail and I can’t get it out of 4wd. My guess would be that happened, and it’s a coincidence - they shouldn’t have touched that when they replaced your clutch.

---

<div class="post-metadata">

**Author:** ![strickerj](https://avatars.discourse-cdn.com/v4/letter/s/9d8465/32.png) [@strickerj](https://community.cartalk.com/u/strickerj)\
**Post date:** [January 25, 2014, 10:26pm UTC](https://community.cartalk.com/t/jeep-wrangler-2003-sport-4-wheel-drive-linkage-missing--could-my-mechanic-have-caused-this/83342/3 "2014-01-25T22:26:06Z")

</div>

Wait, now that I think about it, doesn’t the TJ have the electronic shifter rather than a physical linkage? My '98 Cherokee was like that.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [January 25, 2014, 10:37pm UTC](https://community.cartalk.com/t/jeep-wrangler-2003-sport-4-wheel-drive-linkage-missing--could-my-mechanic-have-caused-this/83342/4 "2014-01-25T22:37:13Z")

</div>

They either forgot to connect the shift lever back onto the trunnion, or the shift linkage onto the shift lever on the transfer case.

A quick look under the vehicle should reveal what wasn’t reconnected.

Tester
