# Jeep Liberty

**URL:** <https://community.cartalk.com/t/jeep-liberty/28832>\
**Category:** Maintenance/Repairs\
**Created:** [April 6, 2009, 8:38pm UTC](https://community.cartalk.com/t/jeep-liberty/28832 "2009-04-06T20:38:12Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kateinme](https://avatars.discourse-cdn.com/v4/letter/k/e19adc/32.png) [@kateinme](https://community.cartalk.com/u/kateinme)\
**Post date:** [April 6, 2009, 8:38pm UTC](https://community.cartalk.com/t/jeep-liberty/28832/1 "2009-04-06T20:38:12Z")

</div>

My jeep is making a grinding/clicking noise really bad in 4 wheel drive bad in 2 wheel drive. no matter the speed could it be transfer case just had new fluid added

---

<div class="post-metadata">

**Author:** ![silvergc1](https://avatars.discourse-cdn.com/v4/letter/s/6f9a4e/32.png) [@silvergc1](https://community.cartalk.com/u/silvergc1)\
**Post date:** [April 7, 2009, 5:36pm UTC](https://community.cartalk.com/t/jeep-liberty/28832/2 "2009-04-07T17:36:06Z")

</div>

Are you sure new fluid was added after the old fluid was drained? Check the fluid level in the transfer case to make sure.

---

<div class="post-metadata">

**Author:** ![VDCdriver](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/vdcdriver/32/30_2.png) [@VDCdriver](https://community.cartalk.com/u/VDCdriver)\
**Post date:** [April 7, 2009, 5:47pm UTC](https://community.cartalk.com/t/jeep-liberty/28832/3 "2009-04-07T17:47:04Z")

</div>

Are you sure that it was the CORRECT specification fluid?

---

<div class="post-metadata">

**Author:** ![realbinky](https://avatars.discourse-cdn.com/v4/letter/r/a87d85/32.png) [@realbinky](https://community.cartalk.com/u/realbinky)\
**Post date:** [April 7, 2009, 8:43pm UTC](https://community.cartalk.com/t/jeep-liberty/28832/4 "2009-04-07T20:43:24Z")

</div>

hypoid/non hypoid cross would really make a mess