# Hub assemblies

**URL:** <https://community.cartalk.com/t/hub-assemblies/33914>\
**Category:** Maintenance/Repairs\
**Tags:** ram, dodge, 1500\
**Created:** [July 24, 2009, 3:48am UTC](https://community.cartalk.com/t/hub-assemblies/33914 "2009-07-24T03:48:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cramail](https://avatars.discourse-cdn.com/v4/letter/c/258eb7/32.png) [@cramail](https://community.cartalk.com/u/cramail)\
**Post date:** [July 24, 2009, 3:48am UTC](https://community.cartalk.com/t/hub-assemblies/33914/1 "2009-07-24T03:48:01Z")

</div>

I recently had new rotors installed and now  
  
 the shop says the hubs are warped.They said it’s not a safety issue but an annoyance issue. If i wait to replace them are they going to be a safety issue and also cost me more because I’ll ruin other parts ?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [July 24, 2009, 3:56am UTC](https://community.cartalk.com/t/hub-assemblies/33914/2 "2009-07-24T03:56:28Z")

</div>

If the bearing between the hub and knuckle is worn out, the rotor no longer runs true to the brake pads/caliper. This then causes rapid wear of the brake pads and caliper slide hardware.

Tester