# How does a transmission "know" when to shift?

**URL:** <https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157>\
**Category:** Maintenance/Repairs\
**Created:** [March 22, 2009, 9:02pm UTC](https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157 "2009-03-22T21:02:18Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jeffmw05](https://avatars.discourse-cdn.com/v4/letter/j/74df32/32.png) [@Jeffmw05](https://community.cartalk.com/u/Jeffmw05)\
**Post date:** [March 22, 2009, 9:02pm UTC](https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157/1 "2009-03-22T21:02:18Z")

</div>

Is there a sensor that senses Crankshaft speed and compares it to road speed? Or is it throttle position vs. Crankshaft speed ?

---

<div class="post-metadata">

**Author:** ![oldschool](https://avatars.discourse-cdn.com/v4/letter/o/e19adc/32.png) [@oldschool](https://community.cartalk.com/u/oldschool)\
**Post date:** [March 22, 2009, 10:00pm UTC](https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157/2 "2009-03-22T22:00:05Z")

</div>

Big question as you have hydraulically controlled and electronicaly controlled transmissions they both rely on pressure differentials at the sides of a shift valve to hold or change a gear.

Page after page of inputs to control shifting. Some transmissions even monitor the fluid temp (either hot or cold) and alter the shift schedule.

Throttle position is fed to both the engine controller and transmission controller,the trans controller is on a CCD BUS with the engine controller

You really are going to have to get the book and plan on spending a lot of time.

---

<div class="post-metadata">

**Author:** ![B.L.E](https://avatars.discourse-cdn.com/v4/letter/b/848f3c/32.png) [@B.L.E](https://community.cartalk.com/u/B.L.E)\
**Post date:** [March 22, 2009, 10:06pm UTC](https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157/3 "2009-03-22T22:06:45Z")

</div>

In the old low tech days, it was engine rpm and manifold vacuum. The higher the manifold vacuum (more closed throttle), the lower rpm the shift point is. The upshift points are higher than the downshift points to prevent annoying gear hunting at certain speeds and hill grades. Some had mechanical throttle position inputs too.  
The thing that measured manifold vacuum had a diaphragm and if that diapragm developed a leak, ATF would get sucked into the intake manifold and you would see a car laying a real smoke screen, on the magnitude of a stunt airplane that turned the smoke system on for an airshow.

A lot of today’s transmissions use computers to control shift points but they still go mostly by engine rpm and manifold vacuum or throttle position and perhaps with engine temperature and other inputs.

---

<div class="post-metadata">

**Author:** ![Jeffmw05](https://avatars.discourse-cdn.com/v4/letter/j/74df32/32.png) [@Jeffmw05](https://community.cartalk.com/u/Jeffmw05)\
**Post date:** [March 22, 2009, 10:48pm UTC](https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157/4 "2009-03-22T22:48:56Z")

</div>

Thanks!

---

<div class="post-metadata">

**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\
**Post date:** [March 22, 2009, 11:36pm UTC](https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157/5 "2009-03-22T23:36:16Z")

</div>

Here’s a start:

> **[Automatic transmission](https://en.wikipedia.org/wiki/Automatic_transmission)**
>
> An automatic transmission, also called auto, self-shifting transmission, n-speed automatic (where n is its number of forward gear ratios), or AT, is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually. Like other transmission systems on vehicles, it allows an internal combustion engine, best suited to run at a relatively high rotational speed, to provide a range of speed and torque outputs nece...

---

<div class="post-metadata">

**Author:** ![transman618](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/transman618/32/24_2.png) [@transman618](https://community.cartalk.com/u/transman618)\
**Post date:** [March 23, 2009, 7:02pm UTC](https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157/6 "2009-03-23T19:02:08Z")

</div>

It will depend on the transmission itself. Yes, input and output speeds are one of a few things the computer uses to command the shifting. TPS readings, Temp readings, MAP sensor readings are other things used. Are you needing information on a specific transmission??

transman

---

<div class="post-metadata">

**Author:** ![racersteve](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/racersteve/32/1110_2.png) [@racersteve](https://community.cartalk.com/u/racersteve)\
**Post date:** [March 23, 2009, 8:09pm UTC](https://community.cartalk.com/t/how-does-a-transmission-know-when-to-shift/28157/7 "2009-03-23T20:09:39Z")

</div>

More reading from “How Stuff Works”:

> **[How Automatic Transmissions Work](https://auto.howstuffworks.com/automatic-transmission.htm)**
>
> Both automatic and manual transmissions accomplish exactly the same thing, but they do it in totally different ways. And it turns out that the way an automatic transmission does it is pretty amazing!
