# How do i change the tensioner pulley on a 2005 suzuki aerio 2.3L

**URL:** <https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363>\
**Category:** Maintenance/Repairs\
**Created:** [September 26, 2014, 3:00am UTC](https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363 "2014-09-26T03:00:04Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![BWEB](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bweb/32/2177_2.png) [@BWEB](https://community.cartalk.com/u/BWEB)\
**Post date:** [September 26, 2014, 3:00am UTC](https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363/1 "2014-09-26T03:00:04Z")

</div>

i just recently went to pepboys to have a mechanic check out my wife’s car cause it was vibrating really bad, and a pulley was making a lot of noise… they told me that the alternator bearings were shot, and i needed 4 motor mounts, long story short i changed the alternator… it wasn’t the problem… had them check it again, they said power stearing… i didn’t want to waist a couple hours of work again, i checked it myself like i should have done in the first place… and found out it was the tensioner pulley… so can i get any pointers on how to change the tensioner pulley, cause i tried and i lacked about 1/4" of space to get the bolt out… do i need to drop the engine or raise it? if so how… thanks

---

<div class="post-metadata">

**Author:** ![SteveC76](https://avatars.discourse-cdn.com/v4/letter/s/958977/32.png) [@SteveC76](https://community.cartalk.com/u/SteveC76)\
**Post date:** [September 26, 2014, 4:56pm UTC](https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363/2 "2014-09-26T16:56:17Z")

</div>

I have never done an Suzuki but a lot of cars you have to remove or loosen motor mounts to get the tensioner off. Once you have the mount free you can raise or lower the engine to gain the clearance you need. Support the engine on a jack with a block of wood on the oil pan.

---

<div class="post-metadata">

**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\
**Post date:** [September 26, 2014, 5:17pm UTC](https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363/3 "2014-09-26T17:17:03Z")

</div>

are you removing center bolt or the 2 perimeter bolts?

---

<div class="post-metadata">

**Author:** ![knfenimore](https://avatars.discourse-cdn.com/v4/letter/k/9fc348/32.png) [@knfenimore](https://community.cartalk.com/u/knfenimore)\
**Post date:** [September 26, 2014, 5:31pm UTC](https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363/4 "2014-09-26T17:31:10Z")

</div>

They sell a tool for getting it off.  
[http://www.northerntool.com/shop/tools/product\_200396081\_200396081?cm\_mmc=Google-pla-](http://www.northerntool.com/shop/tools/product_200396081_200396081?cm_mmc=Google-pla-)_-Automotive-_-Specialty%20Tools-\_-9094032&ci\_src=17588969&ci\_sku=9094032&ci\_src=17588969&ci\_sku=9094032&gclid=Cj0KEQjwnZShBRDfxqzr55rcyMEBEiQA1iRNP1F4n4WLoKNO55U2m\_i6gWW4\_Ih594NKf\_HbvgvaackaAscq8P8HAQ

---

<div class="post-metadata">

**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\
**Post date:** [September 26, 2014, 6:36pm UTC](https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363/5 "2014-09-26T18:36:30Z")

</div>

what does bolt hit? you can obviously touch it and turn it.

---

<div class="post-metadata">

**Author:** ![BWEB](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bweb/32/2177_2.png) [@BWEB](https://community.cartalk.com/u/BWEB)\
**Post date:** [September 27, 2014, 5:32am UTC](https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363/6 "2014-09-27T05:32:06Z")

</div>

the side of the car… i’m gonna undo the motor mount and lower the engine

---

<div class="post-metadata">

**Author:** ![Fender1325](https://avatars.discourse-cdn.com/v4/letter/f/96bed5/32.png) [@Fender1325](https://community.cartalk.com/u/Fender1325)\
**Post date:** [September 27, 2014, 8:59am UTC](https://community.cartalk.com/t/how-do-i-change-the-tensioner-pulley-on-a-2005-suzuki-aerio-2-3l/87363/7 "2014-09-27T08:59:11Z")

</div>

Perhaps you can remove the plastic wheel well to gain access
