# Honda Pilot-Creaking after replaced rear main seal and front motor mount

**URL:** <https://community.cartalk.com/t/honda-pilot-creaking-after-replaced-rear-main-seal-and-front-motor-mount/86093>\
**Category:** Maintenance/Repairs\
**Tags:** noises, repair\
**Created:** [July 19, 2014, 4:47pm UTC](https://community.cartalk.com/t/honda-pilot-creaking-after-replaced-rear-main-seal-and-front-motor-mount/86093 "2014-07-19T16:47:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pilotmom](https://avatars.discourse-cdn.com/v4/letter/p/7ab992/32.png) [@pilotmom](https://community.cartalk.com/u/pilotmom)\
**Post date:** [July 19, 2014, 4:47pm UTC](https://community.cartalk.com/t/honda-pilot-creaking-after-replaced-rear-main-seal-and-front-motor-mount/86093/1 "2014-07-19T16:47:54Z")

</div>

My 2004 Honda Pilot was leaking oil recently. Diagnosis was problem with rear main seal. I took it to a transmission shop. They replaced the rear main seal and the front motor mount. Within 24 hrs of this repair, I started hearing creaking. I hear the noise when I go to straighten out the wheel after turning a corner.

---

<div class="post-metadata">

**Author:** ![Fender1325](https://avatars.discourse-cdn.com/v4/letter/f/96bed5/32.png) [@Fender1325](https://community.cartalk.com/u/Fender1325)\
**Post date:** [July 19, 2014, 4:59pm UTC](https://community.cartalk.com/t/honda-pilot-creaking-after-replaced-rear-main-seal-and-front-motor-mount/86093/2 "2014-07-19T16:59:17Z")

</div>

Bring it back and have them check everything. Maybe the motor mount is a little loose.

---

<div class="post-metadata">

**Author:** ![jesmed1](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/jesmed1/32/2097_2.png) [@jesmed1](https://community.cartalk.com/u/jesmed1)\
**Post date:** [July 19, 2014, 8:56pm UTC](https://community.cartalk.com/t/honda-pilot-creaking-after-replaced-rear-main-seal-and-front-motor-mount/86093/3 "2014-07-19T20:56:02Z")

</div>

Sounds like maybe a bad ball joint or tie rod end. Not necessarily related to the work you had done. Have a trusted local mechanic check it out, bot the transmission shop.

If you don’t have a trusted local mechanic, find one one this site in the Mechanics Files section.
