# Honda Accord Grinding **URL:** \ **Category:** Maintenance/Repairs\ **Created:** [June 16, 2007, 11:18pm UTC](https://community.cartalk.com/t/honda-accord-grinding/657 "2007-06-16T23:18:15Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![AegelmaereAetre](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@AegelmaereAetre](https://community.cartalk.com/u/AegelmaereAetre)\ **Post date:** [June 16, 2007, 11:18pm UTC](https://community.cartalk.com/t/honda-accord-grinding/657/1 "2007-06-16T23:18:15Z")
My 1999 Honda Accord is making some metal-on-metal grinding noises when I get up around 50-60mph. It sometimes only lasts a second or two, and there are other times when it goes on for a minute. I can tell that it is coming from the driver’s side of the car, away from the engine block. The car has 120,000 miles on it. Any help would be appreciated. ---
**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\ **Post date:** [June 17, 2007, 2:27am UTC](https://community.cartalk.com/t/honda-accord-grinding/657/2 "2007-06-17T02:27:26Z")
[b]Have both inner CV-joints inspected for wear. Tester[/b] ---
**Author:** ![AegelmaereAetre](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@AegelmaereAetre](https://community.cartalk.com/u/AegelmaereAetre)\ **Post date:** [June 17, 2007, 2:58pm UTC](https://community.cartalk.com/t/honda-accord-grinding/657/3 "2007-06-17T14:58:00Z")
Thanks; will do. ---
**Author:** ![system](https://global.discourse-cdn.com/cartalk/original/3X/1/d/1d47c66a543aa6c5a7873bb2320858f978ff52ed.png) [@system](https://community.cartalk.com/u/system)\ **Post date:** [June 19, 2007, 9:19pm UTC](https://community.cartalk.com/t/honda-accord-grinding/657/4 "2007-06-19T21:19:24Z")
Could also be wheel bearings and not the cv joints at all. I’ve had them go bad one side at a time.