# Holden ve Berlina 2007

**URL:** <https://community.cartalk.com/t/holden-ve-berlina-2007/138201>\
**Category:** General Discussion\
**Tags:** ford\
**Created:** [April 9, 2019, 5:16am UTC](https://community.cartalk.com/t/holden-ve-berlina-2007/138201 "2019-04-09T05:16:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ash\_Sampson](https://avatars.discourse-cdn.com/v4/letter/a/f0a364/32.png) [@Ash\_Sampson](https://community.cartalk.com/u/Ash_Sampson)\
**Post date:** [April 9, 2019, 5:16am UTC](https://community.cartalk.com/t/holden-ve-berlina-2007/138201/1 "2019-04-09T05:16:46Z")

</div>

hey so recently I’ve got a timing chain replaced and my engine still makes this cranking grinding noise everytime I turn the ignition on only COLD starts when the motor is warm it will start up fine no problems but after leaving the car off for about 4 hrs it’s does it again

---

<div class="post-metadata">

**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\
**Post date:** [April 9, 2019, 11:26am UTC](https://community.cartalk.com/t/holden-ve-berlina-2007/138201/2 "2019-04-09T11:26:59Z")

</div>

What does your mechanic think is noise issue? He can hear the car. We can’t… have heard of Holden. Australia?

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [April 10, 2019, 2:42am UTC](https://community.cartalk.com/t/holden-ve-berlina-2007/138201/3 "2019-04-10T02:42:30Z")

</div>

On of the callers on a recent Car Talk podcast (2019 series) had a very similar problem Unfortunately I don’t recall what Ray and Tom thought the problem was. You may be able to look through the 2019 program descriptions and find it.

Were I to venture a guess, I’d be looking at these things first

- starter motor needs to be shimmed w/respect to the ring gear
- starter motor gear/ring gears damaged
- if an automatic trans, damaged flex plate
- if manual trans and you are depressing clutch pedal at same time, faulty throw-out bearing
- faulty starter motor