# Help. What the next step

**URL:** <https://community.cartalk.com/t/help-what-the-next-step/149257>\
**Category:** Maintenance/Repairs\
**Created:** [September 22, 2019, 11:37am UTC](https://community.cartalk.com/t/help-what-the-next-step/149257 "2019-09-22T11:37:32Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [September 22, 2019, 10:48pm UTC](https://community.cartalk.com/t/help-what-the-next-step/149257/21 "2019-09-22T22:48:48Z")

</div>

> [@Lou\_Campking](#):
>
> What the easist way to get aroind the ani siphone devices

you want to drain the fuel tank . . . ?!

I think it’s best to just write off the whole thing, including whatever fuel’s in the tank

A guy I know used to drive a Chevette. This was obviously quite awhile back. Anyways, when it came time to junk the car, it had a full tank of gas. He was a little upset about that, but I told him to just let it go . . .

---

<div class="post-metadata">

**Author:** ![bcohen2010](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@bcohen2010](https://community.cartalk.com/u/bcohen2010)\
**Post date:** [September 22, 2019, 11:58pm UTC](https://community.cartalk.com/t/help-what-the-next-step/149257/22 "2019-09-22T23:58:04Z")

</div>

> [@Mustangman](#):
>
> I would not waste 20 hours swapping a $300 engine into a 23 year old minivan. Hard for me to trust a $300 engine without doing a bit of teardown and inspection. Even if is warrantied, the labor is not.

If you really like this van, it’s worth the time and effort. If it’s just a “beater car” to you, then I’d save my time, money, and effort. You will spend more on parts and materials than this van is worth, even if someone gives you a running motor for free. Again, if you really like this model, that’s ok; if not, time to move on.

I can tell you that as a novice, I pulled the motor and transmission from a FWD car (Plymouth Sundance) back in the spring, with just a floor jack, jack stands, and a Harbor Freight hydraulic engine lift. The motor and transmission came out the top, once everything was disconnected.

Within a few weeks, when my work slows down for the mild weather, I’m planning to get back into the project. I am looking forward to getting the Sundance running again, it really was a great car compared to other models I see today.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [September 23, 2019, 12:26am UTC](https://community.cartalk.com/t/help-what-the-next-step/149257/23 "2019-09-23T00:26:35Z")

</div>

> [@bcohen2010](#):
>
> I am looking forward to getting the Sundance running again, it really was a great car compared to other models I see today.

I’m glad you’re so excited about the project 😃

But what are these “other models” which you seem to be disparaging . . . ?! 🤔

You’ve really got my attention . . . because I’ve never heard anybody talk so affectionately about a Plymouth Sundance 😐

---

<div class="post-metadata">

**Author:** ![VOLVO-V70](https://avatars.discourse-cdn.com/v4/letter/v/8e8cbc/32.png) [@VOLVO-V70](https://community.cartalk.com/u/VOLVO-V70)\
**Post date:** [September 23, 2019, 12:38am UTC](https://community.cartalk.com/t/help-what-the-next-step/149257/24 "2019-09-23T00:38:39Z")

</div>

> [@bcohen2010](#):
>
> I am looking forward to getting the Sundance running again, it really was a great car compared to other models I see today.

What in the world are you comparing that Sundance to ?

---

<div class="post-metadata">

**Author:** ![old\_mopar\_guy](https://avatars.discourse-cdn.com/v4/letter/o/6bbea6/32.png) [@old\_mopar\_guy](https://community.cartalk.com/u/old_mopar_guy)\
**Post date:** [September 23, 2019, 1:32am UTC](https://community.cartalk.com/t/help-what-the-next-step/149257/25 "2019-09-23T01:32:55Z")

</div>

What makes you think a $300 used engine will be any better than the one in there now?

---

<div class="post-metadata">

**Author:** ![Lou\_Campking](https://avatars.discourse-cdn.com/v4/letter/l/e274bd/32.png) [@Lou\_Campking](https://community.cartalk.com/u/Lou_Campking)\
**Post date:** [September 23, 2019, 2:38am UTC](https://community.cartalk.com/t/help-what-the-next-step/149257/26 "2019-09-23T02:38:46Z")

</div>

I dont know. I taken the general consensus and am going to scrap after stripping down just for the experience.  
I removed the fuel and oil. Plan to opeb engine up tomorrow

[Previous page](https://community.cartalk.com/t/help-what-the-next-step/149257.md?page=1)
