# Help! Crank position sensor

**URL:** <https://community.cartalk.com/t/help-crank-position-sensor/79836>\
**Category:** Maintenance/Repairs\
**Created:** [June 12, 2013, 8:07pm UTC](https://community.cartalk.com/t/help-crank-position-sensor/79836 "2013-06-12T20:07:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jrome](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@Jrome](https://community.cartalk.com/u/Jrome)\
**Post date:** [June 12, 2013, 8:07pm UTC](https://community.cartalk.com/t/help-crank-position-sensor/79836/1 "2013-06-12T20:07:22Z")

</div>

Everything I’ve found on replacing the crank position sensor on my 2002 5.8l Chrysler town & country says its on the bellhousing but its not there! Any suggestions?

---

<div class="post-metadata">

**Author:** ![ken\_green](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/ken_green/32/816_2.png) [@ken\_green](https://community.cartalk.com/u/ken_green)\
**Post date:** [June 12, 2013, 8:09pm UTC](https://community.cartalk.com/t/help-crank-position-sensor/79836/2 "2013-06-12T20:09:24Z")

</div>

Maybe that wrong engine size is the problem.

---

<div class="post-metadata">

**Author:** ![Jrome](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@Jrome](https://community.cartalk.com/u/Jrome)\
**Post date:** [June 12, 2013, 8:13pm UTC](https://community.cartalk.com/t/help-crank-position-sensor/79836/3 "2013-06-12T20:13:59Z")

</div>

3.8l sorry

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [June 12, 2013, 8:57pm UTC](https://community.cartalk.com/t/help-crank-position-sensor/79836/4 "2013-06-12T20:57:09Z")

</div>

Look on the firewall side of the engine block about 8 inches above the oil drain plug. Older 3.3, 3.8L were on the bell housing but it has been moved to the engine block.