# Heater blower motor

**URL:** <https://community.cartalk.com/t/heater-blower-motor/19244>\
**Category:** Maintenance/Repairs\
**Created:** [September 7, 2008, 3:04pm UTC](https://community.cartalk.com/t/heater-blower-motor/19244 "2008-09-07T15:04:17Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![kalley](https://avatars.discourse-cdn.com/v4/letter/k/ac8455/32.png) [@kalley](https://community.cartalk.com/u/kalley)\
**Post date:** [September 7, 2008, 3:04pm UTC](https://community.cartalk.com/t/heater-blower-motor/19244/1 "2008-09-07T15:04:17Z")

</div>

i have a 2000 dodge darango what all do i have to take off to get to the heater blower motor

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [September 7, 2008, 4:21pm UTC](https://community.cartalk.com/t/heater-blower-motor/19244/2 "2008-09-07T16:21:01Z")

</div>

[http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800c09be](http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800c09be)

You’re going to have to take it to an AC service shop to replace the blower motor the proper way.

Tester

---

<div class="post-metadata">

**Author:** ![Cougar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cougar/32/21348_2.png) [@Cougar](https://community.cartalk.com/u/Cougar)\
**Post date:** [September 7, 2008, 8:08pm UTC](https://community.cartalk.com/t/heater-blower-motor/19244/3 "2008-09-07T20:08:37Z")

</div>

I assume you want to remove the unit because it isn’t working. Hopefully you have proved the unit is really defective before you work on getting it out by applying power directly to it.

---

<div class="post-metadata">

**Author:** ![kalley](https://avatars.discourse-cdn.com/v4/letter/k/ac8455/32.png) [@kalley](https://community.cartalk.com/u/kalley)\
**Post date:** [September 8, 2008, 8:18pm UTC](https://community.cartalk.com/t/heater-blower-motor/19244/4 "2008-09-08T20:18:03Z")

</div>

it works but it makes a lot of noise

---

<div class="post-metadata">

**Author:** ![kalley](https://avatars.discourse-cdn.com/v4/letter/k/ac8455/32.png) [@kalley](https://community.cartalk.com/u/kalley)\
**Post date:** [September 8, 2008, 8:19pm UTC](https://community.cartalk.com/t/heater-blower-motor/19244/5 "2008-09-08T20:19:42Z")

</div>

what needs to be done.