# Have 2.7 mopar engine

**URL:** <https://community.cartalk.com/t/have-2-7-mopar-engine/83773>\
**Category:** General Discussion\
**Created:** [February 18, 2014, 6:46am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773 "2014-02-18T06:46:08Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![dodge330](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@dodge330](https://community.cartalk.com/u/dodge330)\
**Post date:** [February 18, 2014, 6:46am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/1 "2014-02-18T06:46:08Z")

</div>

what is your recommendation for oil type for this engine. I know sludge can be a problem. regular oil or syn oil

---

<div class="post-metadata">

**Author:** ![dagosa](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/dagosa/32/9837_2.png) [@dagosa](https://community.cartalk.com/u/dagosa)\
**Post date:** [February 18, 2014, 6:54am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/2 "2014-02-18T06:54:04Z")

</div>

Sludge problem is more a factor in oil change frequency then type of oil. If your car is more prone to sludge, think about changing the oil, any API certified oil recomended for your car, at the recomended intervals for heavy use. But, if no problem occurs at the regular recomended intervals and you are driving it “normally” with regular highway use, breath easy and use the longer nterval. Worry only if your car is used for regular short runs only.

---

<div class="post-metadata">

**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\
**Post date:** [February 18, 2014, 7:01am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/3 "2014-02-18T07:01:57Z")

</div>

Use the recommended weight, I’d go with synthetic if you think it’s worth it. How long have you owned it? How many miles? It might make little difference by now.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [February 18, 2014, 7:10am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/4 "2014-02-18T07:10:04Z")

</div>

This article says to change the oil every 3000 miles

> **[Servicing The Chrysler 3.5L Engine](http://www.techshopmag.com/servicing-the-chrysler-3-5l-engine/)**
>
> If ever there was a service opportunity ripe for the taking, Chrysler's 3.5L SOHC V6 engine (and its 2.7L, 3.2L and 4.0L cousins) is it. This engine was introduced back in 1993 as an "upgrade" from the earlier 3.3L pushrod V6 engine. Some would...

---

<div class="post-metadata">

**Author:** ![the\_same\_mountainbike](https://avatars.discourse-cdn.com/v4/letter/t/c89c15/32.png) [@the\_same\_mountainbike](https://community.cartalk.com/u/the_same_mountainbike)\
**Post date:** [February 18, 2014, 9:06am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/5 "2014-02-18T09:06:44Z")

</div>

Have you read the owner’s manual?

---

<div class="post-metadata">

**Author:** ![dodge330](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@dodge330](https://community.cartalk.com/u/dodge330)\
**Post date:** [February 18, 2014, 4:55pm UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/6 "2014-02-18T16:55:56Z")

</div>

Yes I have read the manual and it said to change every 5 thousand miles. The problem is that Chrysler has a engine with a poor design and sludge has been a problem, even when changing oil on time. As for this engine, it has only 2 thousand miles on it, because it is a replacement engine. I just want to give this engine every chance to survive.

---

<div class="post-metadata">

**Author:** ![oblivion](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@oblivion](https://community.cartalk.com/u/oblivion)\
**Post date:** [February 18, 2014, 6:59pm UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/7 "2014-02-18T18:59:51Z")

</div>

I’d go with full-synthetic oil. Mobil-1 has an excellent detergent package–on my old car, at over 200K miles, the valve cover gaskets were changed. The underside of the valve covers looked like a new engine. It had Mobil-1 most of its life. (3.5L engine) The only drawback of Mobil-1 is my vehicles use a little oil with Mobil-1. But I think it’s a good trade off for the excellent detergent properties in your case.

---

<div class="post-metadata">

**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\
**Post date:** [February 18, 2014, 7:06pm UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/8 "2014-02-18T19:06:29Z")

</div>

Given it is new I’d go with correct-weight synthetic every 5000.

---

<div class="post-metadata">

**Author:** ![dodge330](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@dodge330](https://community.cartalk.com/u/dodge330)\
**Post date:** [February 18, 2014, 9:23pm UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/9 "2014-02-18T21:23:52Z")

</div>

Thank you all for your great advice! I decided to use mobil 1. Also to change it every 5000 miles. I will also keep an eye on oil useage.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [February 19, 2014, 6:49am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/10 "2014-02-19T06:49:59Z")

</div>

Considering it’s a Mopar 2.7 V6, I’d be especially careful

Mobil 1 synthetic  
Oil changes every 3000

---

<div class="post-metadata">

**Author:** ![oldtimer-11](https://avatars.discourse-cdn.com/v4/letter/o/e79b87/32.png) [@oldtimer-11](https://community.cartalk.com/u/oldtimer-11)\
**Post date:** [February 22, 2014, 1:12am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/11 "2014-02-22T01:12:49Z")

</div>

The article in db4690s post tars all the 2.7-3.5 engines with the same brush. As far as I know the 3.5s had no problem with reasonable maintenance. It was the 2.7s that failed because of sludging, typically at 70-80k even when the oil was changed at 3000 miles. I have never even seen the 3.2, maybe they didn’t make many.

---

<div class="post-metadata">

**Author:** ![oblivion](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@oblivion](https://community.cartalk.com/u/oblivion)\
**Post date:** [February 22, 2014, 6:14am UTC](https://community.cartalk.com/t/have-2-7-mopar-engine/83773/12 "2014-02-22T06:14:24Z")

</div>

I can vouch for the 3.5 being a very good engine. Zero internal engine problems in over 260K miles on mine and uses very little oil.
