# From code P0344 dodge neon

**URL:** <https://community.cartalk.com/t/from-code-p0344-dodge-neon/12602>\
**Category:** Maintenance/Repairs\
**Created:** [April 5, 2008, 11:58pm UTC](https://community.cartalk.com/t/from-code-p0344-dodge-neon/12602 "2008-04-05T23:58:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![james2006](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@james2006](https://community.cartalk.com/u/james2006)\
**Post date:** [April 5, 2008, 11:58pm UTC](https://community.cartalk.com/t/from-code-p0344-dodge-neon/12602/1 "2008-04-05T23:58:55Z")

</div>

P0344 = Camshaft position sensor ‘A’ circuit intermittant (Bank 1 or single sensor)  
  
 ‘A’ circuit is intake side. ‘B’ circuit is exhaust side.  
  
 where is b circuit -exhaust side located  
  
 i replaced the sensor which was located on cylinder head,is that A-circuit-intake side  
  
  
  
 and where is circuit B located the exhaust side

---

<div class="post-metadata">

**Author:** ![Cougar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cougar/32/21348_2.png) [@Cougar](https://community.cartalk.com/u/Cougar)\
**Post date:** [April 6, 2008, 3:04pm UTC](https://community.cartalk.com/t/from-code-p0344-dodge-neon/12602/2 "2008-04-06T15:04:28Z")

</div>

I can’t say where the sensors are sorry to say, but since the code is stating that the circuit is intermittent, it may be that there is only a connection problem to the sensor. The sensor itself may be good.

I wonder if this vehicle really has a ‘B’ side sensor. It may not.