# Frame hunting **URL:** \ **Category:** General Discussion\ **Tags:** mustang, ford\ **Created:** [August 22, 2021, 3:33am UTC](https://community.cartalk.com/t/frame-hunting/178884 "2021-08-22T03:33:07Z")\ **Posts on this page:** 7\ **Page:** 2
**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\ **Post date:** [August 22, 2021, 8:25pm UTC](https://community.cartalk.com/t/frame-hunting/178884/21 "2021-08-22T20:25:50Z")
Tv show Texas metal did that last year. Took a new camaro Zl-1 and cut out unibody rails and made a new frame. But they wanted to put 18” wide wheels in rear and had to cut up 90% of floor to fit in new rails and wheel tubs. They charge about $100k for their “typical” jobs. Watch a few episodes and see what they do. ---
**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\ **Post date:** [August 22, 2021, 8:43pm UTC](https://community.cartalk.com/t/frame-hunting/178884/22 "2021-08-22T20:43:13Z")
There are many redneck 4 wheel drive cars, they don’t look like they were assembled by talented engineers. ![image](https://global.discourse-cdn.com/cartalk/original/3X/3/2/323cece8e0ea1f5fc6fd82d07bbc6b612e584d0f.jpeg) ---
**Author:** ![Renegade](https://avatars.discourse-cdn.com/v4/letter/r/b4bc9f/32.png) [@Renegade](https://community.cartalk.com/u/Renegade)\ **Post date:** [August 22, 2021, 9:04pm UTC](https://community.cartalk.com/t/frame-hunting/178884/23 "2021-08-22T21:04:22Z")
> [@Nevada\_545](#): > > There are many redneck 4 wheel drive cars The Chihuahua dog is also known as an attitude with four legs if someone was to build a Smart car like the one in the picture would it be also be known as an attitude with four wheels? 😆 ---
**Author:** ![wolyrobb](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/wolyrobb/32/45497_2.png) [@wolyrobb](https://community.cartalk.com/u/wolyrobb)\ **Post date:** [August 23, 2021, 4:30am UTC](https://community.cartalk.com/t/frame-hunting/178884/24 "2021-08-23T04:30:31Z")
Don’t know what chassis is underneath but there’s a 1987 or 88 Camry on a 4wd chassis that’s been around for years, now lives next door to a co-worker. ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [August 23, 2021, 12:35pm UTC](https://community.cartalk.com/t/frame-hunting/178884/25 "2021-08-23T12:35:39Z")
Kinda looks like it doesn’t run though…No engine or transmission, No door handle, no mud embedded in the treads or the wheelwells. Basically a big ugly lawn ornament. ---
**Author:** ![FoDaddy](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/fodaddy/32/717_2.png) [@FoDaddy](https://community.cartalk.com/u/FoDaddy)\ **Post date:** [September 1, 2021, 3:09pm UTC](https://community.cartalk.com/t/frame-hunting/178884/26 "2021-09-01T15:09:30Z")
New Edge = 99-04 . Same chassis a the SN95 (94-98), but more angular styling (hence the name “New Edge”. In the Mustang world SN95’s are 94-98, and New Edge is 99-04. Even though they are mechanically the same as far as chassis/brakes/suspension goes. ---
**Author:** ![It\_s-Me](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/it_s-me/32/12660_2.png) [@It\_s-Me](https://community.cartalk.com/u/It_s-Me)\ **Post date:** [September 1, 2021, 8:39pm UTC](https://community.cartalk.com/t/frame-hunting/178884/27 "2021-09-01T20:39:41Z")
> [@FoDaddy](#): > > In the Mustang world SN95’s are 94-98, and New Edge is 99-04. Thanks, it’s been a long time since I tried keeping track of all that. [Previous page](https://community.cartalk.com/t/frame-hunting/178884.md?page=1)