# Ford taurus

**URL:** <https://community.cartalk.com/t/ford-taurus/21283>\
**Category:** Maintenance/Repairs\
**Created:** [October 27, 2008, 12:54am UTC](https://community.cartalk.com/t/ford-taurus/21283 "2008-10-27T00:54:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![diymike](https://avatars.discourse-cdn.com/v4/letter/d/6f9a4e/32.png) [@diymike](https://community.cartalk.com/u/diymike)\
**Post date:** [October 27, 2008, 12:54am UTC](https://community.cartalk.com/t/ford-taurus/21283/1 "2008-10-27T00:54:57Z")

</div>

I am replacing the heater core in a 1993 Ford Taurus and cannot disconnect the a/c lines from the plastic housing. Any ideas?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [October 27, 2008, 1:06am UTC](https://community.cartalk.com/t/ford-taurus/21283/2 "2008-10-27T01:06:51Z")

</div>

You’re probably running into a situation where you need a tool like this.

[http://www.sjdiscounttools.com/kd3290.html](http://www.sjdiscounttools.com/kd3290.html)

Tester

---

<div class="post-metadata">

**Author:** ![mcparadise](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mcparadise/32/32_2.png) [@mcparadise](https://community.cartalk.com/u/mcparadise)\
**Post date:** [October 27, 2008, 11:29am UTC](https://community.cartalk.com/t/ford-taurus/21283/3 "2008-10-27T11:29:41Z")

</div>

You sure can learn some interesting things reading these posts.

Thanks, Tester.