# FORD 2.0 DOHC compression

**URL:** <https://community.cartalk.com/t/ford-2-0-dohc-compression/50090>\
**Category:** Maintenance/Repairs\
**Tags:** contour, ford\
**Created:** [June 9, 2010, 1:45pm UTC](https://community.cartalk.com/t/ford-2-0-dohc-compression/50090 "2010-06-09T13:45:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![engmachshop](https://avatars.discourse-cdn.com/v4/letter/e/71e660/32.png) [@engmachshop](https://community.cartalk.com/u/engmachshop)\
**Post date:** [June 9, 2010, 1:45pm UTC](https://community.cartalk.com/t/ford-2-0-dohc-compression/50090/1 "2010-06-09T13:45:59Z")

</div>

98 Ford 2.0 dohc [vin 3] we reseat valves[in head]& then ck valves for sealing {vacuum tester on Kwik\*Way Seat & Guide Mach. All valves show _20-25Vacuum_,shows us that valves are seated BUT cust. picks up head , bolt on block , said even with camshaft loose & Lifters are out of head , STILL have [2] cyl.s that are Showing “0” Compression?? don’t understand what in the World is going on ? brought head back , Put head back on Vacuum Tester & ALL Valves Still show [20-25] on Vacuum Tester ? ALL other Cyl.s & Valves show same Vacuum & cust. said that all other cyl.s show to Good Compression ?  
  
 THANK U for any & all HELP  
  
 butch

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [June 9, 2010, 2:35pm UTC](https://community.cartalk.com/t/ford-2-0-dohc-compression/50090/2 "2010-06-09T14:35:23Z")

</div>

A cylinder leak down test will indicate why there’s no compression in a cylinder.

Tester
