# Faulty EGR Pressure Sensor

**URL:** <https://community.cartalk.com/t/faulty-egr-pressure-sensor/16471>\
**Category:** Maintenance/Repairs\
**Created:** [July 9, 2008, 10:41pm UTC](https://community.cartalk.com/t/faulty-egr-pressure-sensor/16471 "2008-07-09T22:41:46Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![cliffdodge](https://avatars.discourse-cdn.com/v4/letter/c/977dab/32.png) [@cliffdodge](https://community.cartalk.com/u/cliffdodge)\
**Post date:** [July 9, 2008, 10:41pm UTC](https://community.cartalk.com/t/faulty-egr-pressure-sensor/16471/1 "2008-07-09T22:41:46Z")

</div>

1999 Ford Taurus 150+Miles. My EGR pressure sensor goes faulty about once a year. At $99 per year (this is the fourth year), I’d much rather find what could cause this. Where can I start looking?  
  
 Thanks

---

<div class="post-metadata">

**Author:** ![the\_same\_mountainbike](https://avatars.discourse-cdn.com/v4/letter/t/c89c15/32.png) [@the\_same\_mountainbike](https://community.cartalk.com/u/the_same_mountainbike)\
**Post date:** [July 9, 2008, 11:40pm UTC](https://community.cartalk.com/t/faulty-egr-pressure-sensor/16471/2 "2008-07-09T23:40:43Z")

</div>

I’ve never heard of an EGR pressure sensor failing repeatedly like this.

What is the mode of failure?  
Is the sensor crudded up with carbon, affecting its ability to accurately monitor the pressures?  
Does the output go to zero, as in a chronic electrical break?  
Have you checked the wires going to it?

Are you burning oil?

Keep the bad one and try to find out exactly how it’s failing.

---

<div class="post-metadata">

**Author:** ![eldakota](https://avatars.discourse-cdn.com/v4/letter/e/ecd19e/32.png) [@eldakota](https://community.cartalk.com/u/eldakota)\
**Post date:** [July 28, 2008, 2:17pm UTC](https://community.cartalk.com/t/faulty-egr-pressure-sensor/16471/3 "2008-07-28T14:17:45Z")

</div>

I have a '95 Mustang with a 3.8 in it and 170k miles with the same problem. In the last three years I have replaced the DPFE on it four times. I always get the P1401 error code ‘no flow detected’. It only has one wire that outputs to the PCM and appears ok. Any other ideas? The car seems to run ok other than the check engine light being on.

---

<div class="post-metadata">

**Author:** ![hellokit](https://avatars.discourse-cdn.com/v4/letter/h/6a8cbe/32.png) [@hellokit](https://community.cartalk.com/u/hellokit)\
**Post date:** [July 28, 2008, 3:01pm UTC](https://community.cartalk.com/t/faulty-egr-pressure-sensor/16471/4 "2008-07-28T15:01:43Z")

</div>

Have you followed the DTC chart for the EGR pressure sensor (DPFE)? You can get the chart from [www.alldata.com](http://www.alldata.com). It’s available online for $25 year for your car. Some public libraries have a subscription to [www.alldata.com](http://www.alldata.com), FREE to you. Ask a librarian.

---

<div class="post-metadata">

**Author:** ![ken\_green](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/ken_green/32/816_2.png) [@ken\_green](https://community.cartalk.com/u/ken_green)\
**Post date:** [July 28, 2008, 3:04pm UTC](https://community.cartalk.com/t/faulty-egr-pressure-sensor/16471/5 "2008-07-28T15:04:34Z")

</div>

No real sulution . The DPFE fails because it ingests water or vapor from somewhere. The moisture shorts the electrical portion of the sensor. No one’s really sure where the moisture comes from, that I’ve heard of yet.
