# Engine misses from warm restart

**URL:** <https://community.cartalk.com/t/engine-misses-from-warm-restart/189246>\
**Category:** Maintenance/Repairs\
**Tags:** nissan, pathfinder\
**Created:** [February 20, 2023, 9:22pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246 "2023-02-20T21:22:18Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [February 20, 2023, 9:22pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/1 "2023-02-20T21:22:18Z")

</div>

1996 Pathfinder, 110K miles. Runs fine from cold start but misses in one cylinder when restart again when engine is warm. Spark plug in that cylinder looks like it’s never seen gasoline, like brand new.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [February 20, 2023, 10:01pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/2 "2023-02-20T22:01:36Z")

</div>

There are other things that cause a misfire in a cylinder.

Bad injector, a bad plug wire, or a worn distributor shaft bushing.

Tester

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [February 21, 2023, 3:52am UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/3 "2023-02-21T03:52:35Z")

</div>

Thx. Injector was my first thought, but why runs great with no missing from a cold start?Plug wires have been replaced. I don’t know about worn distriibutor shaft bushing but again why runs fine from cold start? How do I diagnose worn distributor shaft bushing?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [February 21, 2023, 4:06am UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/4 "2023-02-21T04:06:23Z")

</div>

> [@maier78hofer](#):
>
> How do I diagnose worn distributor shaft bushing?

Run the engine until it starts to miss.

Remove the distributor cap and wiggle the rotor.

[![](https://global.discourse-cdn.com/cartalk/original/3X/e/9/e94eed0c9b28d2f26d4d618131c249a26613d16b.jpeg "Worn distributor bushings?") ](https://www.youtube.com/watch?v=yCyRsJlyL_w)

Tester

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [February 21, 2023, 4:14am UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/5 "2023-02-21T04:14:12Z")

</div>

Thank you. I’ll give it a shot.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [February 24, 2023, 11:05pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/6 "2023-02-24T23:05:36Z")

</div>

Misfire when warm, not cold, doesn’t seem like a faulty injector to diy’er me. Injector faults not commonly heat related. I’d guess the more likely cause is a problem with ignition system (e.g. distributor as mentioned above). Could be a problematic distributor cap or distributor rotor as well.

If I had that problem, since I knew which plug was causing the problem, I’d put a timing light on that plug’s wire, and see if the timing light behaved differently when engine cold vs engine hot. The other difference between cold vs hot engine is cold engine is running much richer mixture. So if ignition signal to that spark plug was weak, it might still be enough to fire with richer mixture, but not fire once mixture is leaned out due to warmer engine.

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [February 26, 2023, 7:30pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/7 "2023-02-26T19:30:07Z")

</div>

These all have been interesting thoughts. You’d think it boils down to only 3 possibilities - problems with 1) spark, 2) fuel, or 3) compression. In my case spark seems good in all 4 cables, compression checked out, leaving fuel. All injectors sound the same with a stethoscope. Haven’t checked resistance. Could resistance be off and injectors are purring along?

I can’t see that a distributor malfunction would always cause a specific single cylinder to misfire as long as cables are doing their job and cap isn’t cracked. Distributor cap has been replaced and plugs are good evidenced by switching them and miss stays in same cylinder.

This has been a mystery to me for over a year. Mechanics just seem to want to replace things without a diagnosis. Wish the even-numbered injectors weren’t so hard to get to.

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [February 26, 2023, 7:31pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/8 "2023-02-26T19:31:15Z")

</div>

(post deleted by author)

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [February 26, 2023, 9:25pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/9 "2023-02-26T21:25:36Z")

</div>

> [@maier78hofer](#):
>
> I can’t see that a distributor malfunction would always cause a specific single cylinder to misfire as long as cables are doing their job and cap isn’t cracked.

I presume you’ve ruled out shaft play. Does the electrode inside the cap corresponding to that plug look any different than the other 3?

> [@maier78hofer](#):
>
> All injectors sound the same with a stethoscope. Haven’t checked resistance. Could resistance be off and injectors are purring along?

It’s certainly possible you have a faulty injector. If measuring injector solenoid resistance is relatively easy to do, probably worthwhile doing. Correct resistance doesn’t necessarily imply injector is good though. Your shop might try a noid-light test gadget to make sure the electrical pulses to the injectors all seem the same.

> [@maier78hofer](#):
>
> Spark plug in that cylinder looks like it’s never seen gasoline, like brand new.

Another unlikely idea, but when a used spark plug looks new, like it has been steam cleaned, well, maybe it has. Could indicate coolant is getting into the cylinder, faulty head gasket etc. Any other signs of a head gasket problem? Engine overheated shortly before this all started? With engine at normal operating temperature, is there white smoke coming out of tailpipe as you accelerate up a freeway on ramp? Ask helper to follow you, looking at your tailpipe. Do you have to add coolant from time to time?

Has your shop connected a spare spark plug to that wire and visually inspect the spark crossing the electrodes while cranking engine? It’s possible to have a spark, but it isn’t hot enough to properly fire the cylinder. A good, robust spark is blue-ish white. Any orange or red colors is suspect. I experienced the orange-spark problem on my truck a few years ago. Wouldn’t start until corrected. Seems unlikely given everything you’ve done, but fairly easy test to do.

Has a shop with access to a Nissan pro-level scan tool had a chance to offer an opinion? Have you had a battery/charging system test?

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [February 26, 2023, 11:21pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/10 "2023-02-26T23:21:24Z")

</div>

> [@maier78hofer](#):
>
> Spark plug in that cylinder looks like it’s never seen gasoline, like brand new.

Remove the spark plug after running the engine, inspect for steam coming from that cylinder. Inspect inside the cylinder with a borescope for coolant entering.

---

<div class="post-metadata">

**Author:** ![TwinTurbo](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@TwinTurbo](https://community.cartalk.com/u/TwinTurbo)\
**Post date:** [February 27, 2023, 12:40pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/11 "2023-02-27T12:40:16Z")

</div>

> [@maier78hofer](#):
>
> Spark plug in that cylinder looks like it’s never seen gasoline, like brand new.

As soon as I saw this I thought the same thing. Burning coolant cleans spark plugs so they look like they are brand new…telltale sign…

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [February 27, 2023, 11:10pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/12 "2023-02-27T23:10:33Z")

</div>

No other signs of a cracked head gasket.

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [March 3, 2023, 6:47pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/13 "2023-03-03T18:47:00Z")

</div>

Healthy spark when I separate wire from plug about a centimeter. Have replaced plug wires and distributor cap. Distributor seems solid in mount. Never over-heated. No white smoke. No coolant loss except small amount from lower radiator hose. No “milkshake” in coolant. Haven’t had a pro-level scan tool. No sign of a battery or alternator problem.

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [March 3, 2023, 6:53pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/14 "2023-03-03T18:53:09Z")

</div>

> [@maier78hofer](#):
>
> Never over-heated. No white smoke. No coolant loss except small amount from lower radiator hose. No “milkshake” in coolant.

Those observations are not relevant, it only takes a few drops of coolant seeping into a cylinder to cause a misfire during start-up.

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [March 3, 2023, 6:56pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/15 "2023-03-03T18:56:35Z")

</div>

Yes. Misfire isn’t upon start-up after vehicle has been sitting overnight when you might expect more coolant to have entered cylinder if there’s a bad head gasket. Misfiring occurs after warm-up and resting for 10-15 minutes before restarting.

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [March 4, 2023, 8:21pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/16 "2023-03-04T20:21:07Z")

</div>

No “wobble” whatsoever.

---

<div class="post-metadata">

**Author:** ![peejay75](https://avatars.discourse-cdn.com/v4/letter/p/848f3c/32.png) [@peejay75](https://community.cartalk.com/u/peejay75)\
**Post date:** [November 25, 2025, 2:40am UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/17 "2025-11-25T02:40:00Z")

</div>

Did you ever figure this out? My 2002 Frontier has recently started doing the exact same thing! First start of the morning, engine runs like a top. Stop at the local big box home improvement store for 15 minutes to buy more lumber to replace the warped lumber I bought the day before, and the engine sputters at restart, takes about 5 minutes for it to clear and return to normal. If the CEL comes on, it’s usually a P0302, always the same code/cylinder. My guess is leaking injector but that’s just a guess!

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [November 25, 2025, 6:18pm UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/18 "2025-11-25T18:18:30Z")

</div>

Haven’t definitively identified the problem but agree it’s probably a fuel injector problem. I rarely smell gasoline but possibly leaking.

In the past, one shot of BG 44K has quickly resolved the problem which stays resolved as long as I regularly drive this vehicle.

Lately I’m not often driving this one and problem has returned and 44K doesn’t seem to do anything. My plan now is to double the dose and give it a couple of “Italian tune-ups” and see what happens.

If you come up with something definitive, please let me know.

---

<div class="post-metadata">

**Author:** ![peejay75](https://avatars.discourse-cdn.com/v4/letter/p/848f3c/32.png) [@peejay75](https://community.cartalk.com/u/peejay75)\
**Post date:** [November 26, 2025, 4:38am UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/19 "2025-11-26T04:38:08Z")

</div>

Thanks for the response, and the laughs! 😂

I’m suspecting a leaking injector, too, but as you know, due to the ■■■■■■ design of burying the injectors beneath the intake plenum, it’s a pain to test/check.

I guess I could measure the resistance of the injector(s) at the mutliconnector when cold, then try and measure again after a short trip and before starting the engine.

(The weird thing is, I can have my bluetooth scanner recording the “normal” drive, but when I try to record it during the restart, it gives me a blank recording, but that could be user error or a crummy app.)

Will keep you posted!

---

<div class="post-metadata">

**Author:** ![maier78hofer](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@maier78hofer](https://community.cartalk.com/u/maier78hofer)\
**Post date:** [November 26, 2025, 4:45am UTC](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246/20 "2025-11-26T04:45:49Z")

</div>

Since it’s the No. 2, I think it might be replaceable by removing the distributor. That should be much easier than removing all that ■■■■ on top. I haven’t yet had the inclination to try that route.

Can’t find my comments. What gave you a laugh?

[Next page](https://community.cartalk.com/t/engine-misses-from-warm-restart/189246.md?page=2)
