# Directional Bulb replacement

**URL:** <https://community.cartalk.com/t/directional-bulb-replacement/60230>\
**Category:** Maintenance/Repairs\
**Tags:** ford\
**Created:** [January 20, 2011, 9:17pm UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230 "2011-01-20T21:17:04Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![jrbostonma](https://avatars.discourse-cdn.com/v4/letter/j/da6949/32.png) [@jrbostonma](https://community.cartalk.com/u/jrbostonma)\
**Post date:** [January 20, 2011, 9:17pm UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230/1 "2011-01-20T21:17:04Z")

</div>

I have a 1996 Ford Crown Vic. Passenger side front directional is out. Purchased bulb. Removed front lens set screw but can’t pull the lens out the rest of the way. What is the trick for removing the lens without breaking it ?

---

<div class="post-metadata">

**Author:** ![mcparadise](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mcparadise/32/32_2.png) [@mcparadise](https://community.cartalk.com/u/mcparadise)\
**Post date:** [January 20, 2011, 9:58pm UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230/2 "2011-01-20T21:58:09Z")

</div>

Does the owner’s manual have any information about bulb replacement? It might have a diagram showing you how to do it.

---

<div class="post-metadata">

**Author:** ![mshugna](https://avatars.discourse-cdn.com/v4/letter/m/ce73a5/32.png) [@mshugna](https://community.cartalk.com/u/mshugna)\
**Post date:** [January 20, 2011, 10:03pm UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230/3 "2011-01-20T22:03:16Z")

</div>

why not call parts/service department at local dealership?

---

<div class="post-metadata">

**Author:** ![Joseph\_E\_Meehan](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/joseph_e_meehan/32/21_2.png) [@Joseph\_E\_Meehan](https://community.cartalk.com/u/Joseph_E_Meehan)\
**Post date:** [January 20, 2011, 10:04pm UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230/4 "2011-01-20T22:04:54Z")

</div>

Maybe it is accessed from the trunk?

---

<div class="post-metadata">

**Author:** ![jrbostonma](https://avatars.discourse-cdn.com/v4/letter/j/da6949/32.png) [@jrbostonma](https://community.cartalk.com/u/jrbostonma)\
**Post date:** [January 20, 2011, 10:24pm UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230/5 "2011-01-20T22:24:19Z")

</div>

I have the manual in the car. Thanks for the idea. I hope the info is there.

---

<div class="post-metadata">

**Author:** ![jrbostonma](https://avatars.discourse-cdn.com/v4/letter/j/da6949/32.png) [@jrbostonma](https://community.cartalk.com/u/jrbostonma)\
**Post date:** [January 20, 2011, 10:31pm UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230/6 "2011-01-20T22:31:20Z")

</div>

It’s the Front directional bulb on the passenger side.

---

<div class="post-metadata">

**Author:** ![waterboy](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/waterboy/32/764_2.png) [@waterboy](https://community.cartalk.com/u/waterboy)\
**Post date:** [January 20, 2011, 11:24pm UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230/7 "2011-01-20T23:24:44Z")

</div>

From the interweb, that world wide wiver if infowmation.

The front parking light and turn signal are separate filaments in the same bulb. First remove the plastic access panel, under the hood and behind the headlight, that gives you access to the headlight bulb sockets. This allows you to see the two 7/16 nuts on the studs on the parking light housing. Remove the nuts. Remove the phillips head screw on the outside lower rear corner of the parking light housing. The housing is now free. Pull it straight our from the fender. Turn the light socket slightly and remove it from the housing. The bulb will pull straight out from the socket.

Read more: [http://wiki.answers.com/Q/How\_do\_you\_replace\_the\_front\_turn\_signal\_bulb\_located\_on\_a\_1996\_Ford\_Crown\_Victoria#ixzz1BcYMYtbZ](http://wiki.answers.com/Q/How_do_you_replace_the_front_turn_signal_bulb_located_on_a_1996_Ford_Crown_Victoria#ixzz1BcYMYtbZ)

---

<div class="post-metadata">

**Author:** ![oldschool](https://avatars.discourse-cdn.com/v4/letter/o/e19adc/32.png) [@oldschool](https://community.cartalk.com/u/oldschool)\
**Post date:** [January 21, 2011, 12:49am UTC](https://community.cartalk.com/t/directional-bulb-replacement/60230/8 "2011-01-21T00:49:20Z")

</div>

Why not call a local independant, spread the work/freebies around a bit.
