# DIAG clicking/thumping when turning, Sway Bar End Link, But is Good? **URL:** \ **Category:** Maintenance/Repairs\ **Tags:** toyota, camry\ **Created:** [May 26, 2024, 12:08am UTC](https://community.cartalk.com/t/diag-clicking-thumping-when-turning-sway-bar-end-link-but-is-good/194980 "2024-05-26T00:08:09Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![davesmopar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/davesmopar/32/41750_2.png) [@davesmopar](https://community.cartalk.com/u/davesmopar)\ **Post date:** [May 26, 2024, 12:20am UTC](https://community.cartalk.com/t/diag-clicking-thumping-when-turning-sway-bar-end-link-but-is-good/194980/4 "2024-05-26T00:20:56Z")
Isn’t this the same problem you asked for help on a while back, and if so WTH are you starting another thread about it for??? … > [@Diag Knocking Sound While Turning, Will I need an Alignment?](https://community.cartalk.com/t/diag-knocking-sound-while-turning-will-i-need-an-alignment/194713): > > 2005 Camry. 210k miles. I’m trying to diag a clunking sound when turning the steering wheel. Hear it with the car lifted up, car off and turning steering wheel, or while driving it. I checked the intermediate steering shaft u joints, both lower ball joints, sway bar links, outer tie rods, cv axle boots, and mcpherson strut mounts. Didn’t see anything obvious. Using a stethoscope, the knocking sound seemed to be the loudest on the upper ball joint of the left sway bar end link. Added some addit… --- _[View the full topic](https://community.cartalk.com/t/diag-clicking-thumping-when-turning-sway-bar-end-link-but-is-good/194980)._