# Design choices that create frustration during repairs

**URL:** <https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161>\
**Category:** General Discussion\
**Created:** [January 13, 2024, 4:33pm UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161 "2024-01-13T16:33:18Z")\
**Posts on this page:** 9\
**Page:** 4

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [January 21, 2024, 11:32pm UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/61 "2024-01-21T23:32:56Z")

</div>

The outer door panel is on the outside of the door, the inner door panel is the trim panel inside the vehicle. “Door skin” and “door card” are what the dude at the body shop calls them.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [January 22, 2024, 10:29pm UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/62 "2024-01-22T22:29:25Z")

</div>

Just curious, What sort of material do body shops use to replace that plastic lining when it gets damaged? Do they use bulk plastic material and cut it to fit, or do they purchase a custom piece of plastic that’s already cut to fit?

---

<div class="post-metadata">

**Author:** ![asemaster](https://avatars.discourse-cdn.com/v4/letter/a/5f9b8f/32.png) [@asemaster](https://community.cartalk.com/u/asemaster)\
**Post date:** [January 23, 2024, 12:30am UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/63 "2024-01-23T00:30:50Z")

</div>

Here are a couple of pics of yesterday’s thermostat replacement in my wife’s car.

 ![20240121_094343](https://global.discourse-cdn.com/cartalk/original/3X/8/6/86689e318c3486176f17bedd3e2115d0445ddd2f.jpeg)  
 ![20240121_103836](https://global.discourse-cdn.com/cartalk/original/3X/c/a/ca697ccc5324060976785e7b0ee46011bf3614c0.jpeg)

Transverse V6 with the thermostat located in the valley underneath the intake manifold. Not nearly as bad to do as you would think.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [January 23, 2024, 12:43am UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/64 "2024-01-23T00:43:51Z")

</div>

Thanks for the interesting photos. Trying to imagine that configuration. Is the bottom of the valley used as a sort of coolant passageway, and there’s a gasket-ed cover over the bottom of the valley to direct the coolant flow, and the intake manifold fits above that?

---

<div class="post-metadata">

**Author:** ![asemaster](https://avatars.discourse-cdn.com/v4/letter/a/5f9b8f/32.png) [@asemaster](https://community.cartalk.com/u/asemaster)\
**Post date:** [January 23, 2024, 1:29am UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/65 "2024-01-23T01:29:46Z")

</div>

![20240121_103857](https://global.discourse-cdn.com/cartalk/original/3X/5/c/5c751a8e784ee4dc7ec9465b5a7be5da5bc71282.jpeg)

The thermostat and housing is one piece, held down by the two 10mm head bolts on the left side of the pic. The coolant tube slides out towards the right and that connection is sealed by an o-ring.

It’s a little more time-consuming, but not nearly as annoying as the vertical t-stat and bypass hose on something like a '72 Ford 302. 😀

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [January 23, 2024, 2:13am UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/66 "2024-01-23T02:13:54Z")

</div>

@asemaster That looks like the same 3.6-liter GDI V6 as on a 2019 GMC Canyon I worked on a few days ago

I had to remove the intake in order to replace all 4 variable valve timing solenoids

It was a LOT more work to remove it in a longitudinal application . . . the entire cowl had to come out first 😆

---

<div class="post-metadata">

**Author:** ![asemaster](https://avatars.discourse-cdn.com/v4/letter/a/5f9b8f/32.png) [@asemaster](https://community.cartalk.com/u/asemaster)\
**Post date:** [January 23, 2024, 3:26am UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/67 "2024-01-23T03:26:07Z")

</div>

> [@db4690](#):
>
> That looks like the same 3.6-liter GDI V6 as on a 2019 GMC Canyon

Yes, the same 3.6 is used throughout the GM family. But as you say, an engine mounted front to rear doesn’t mean it’s easier to work on.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [January 23, 2024, 10:01pm UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/68 "2024-01-23T22:01:08Z")

</div>

> [@asemaster](#):
>
> not nearly as annoying as the vertical t-stat and bypass hose on something like a '72 Ford 302. 😀

Yeah, that bypass hose does annoyingly get in the way. I learned to always remove it first before replacing my truck’s thermostat .

---

<div class="post-metadata">

**Author:** ![Marnet](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/marnet/32/41_2.png) [@Marnet](https://community.cartalk.com/u/Marnet)\
**Post date:** [February 4, 2024, 4:16am UTC](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161/69 "2024-02-04T04:16:54Z")

</div>

> [@George\_San\_Jose1](#):
>
> The burden is on the new car purchaser to compare the cost of typical repairs, car to car, before deciding which one to buy.

That’s something I learned from years of reading here in the forum! 🙂 Checking on the comparative costs of routine maintenance and typical repairs quickly narrowed my field of possible car models to those I could afford to maintain as well as buy in the first place the several times I’ve bought a car.

[Previous page](https://community.cartalk.com/t/design-choices-that-create-frustration-during-repairs/194161.md?page=3)
