# CV Joint maybe?

**URL:** <https://community.cartalk.com/t/cv-joint-maybe/2992>\
**Category:** Maintenance/Repairs\
**Created:** [August 12, 2007, 4:40pm UTC](https://community.cartalk.com/t/cv-joint-maybe/2992 "2007-08-12T16:40:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ash.leigh](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@Ash.leigh](https://community.cartalk.com/u/Ash.leigh)\
**Post date:** [August 12, 2007, 4:40pm UTC](https://community.cartalk.com/t/cv-joint-maybe/2992/1 "2007-08-12T16:40:31Z")

</div>

Ok, I have a 96’ GMC Yukon. When I go to turn kinda sharp like into a parking spot it seems as if it doesnt want to turn. Any ideas?

---

<div class="post-metadata">

**Author:** ![bloody\_knuckles](https://avatars.discourse-cdn.com/v4/letter/b/ee7513/32.png) [@bloody\_knuckles](https://community.cartalk.com/u/bloody_knuckles)\
**Post date:** [August 13, 2007, 1:02am UTC](https://community.cartalk.com/t/cv-joint-maybe/2992/2 "2007-08-13T01:02:29Z")

</div>

This should be a rear drive vehicle unless you have the 4wd version. Since you did not specify it is hard to tell. You also have not supplied much of a description of the problem. If I had to guess I would say either the u-joint in the steering shaft is shot or your power steering pump is about to fail. I do not think this is a “rack and pinion” set up so at least that can’t be your problem.