# Crown vic 98 swaybar bushing size

**URL:** <https://community.cartalk.com/t/crown-vic-98-swaybar-bushing-size/46474>\
**Category:** Maintenance/Repairs\
**Tags:** ford\
**Created:** [March 22, 2010, 6:47pm UTC](https://community.cartalk.com/t/crown-vic-98-swaybar-bushing-size/46474 "2010-03-22T18:47:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sauvej87](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@sauvej87](https://community.cartalk.com/u/sauvej87)\
**Post date:** [March 22, 2010, 6:47pm UTC](https://community.cartalk.com/t/crown-vic-98-swaybar-bushing-size/46474/1 "2010-03-22T18:47:17Z")

</div>

I have a 98 Crown vic police interceptor and i need to change the front driver side sway bar bushings but i cant figure out the size can anyone help?

---

<div class="post-metadata">

**Author:** ![ken\_green](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/ken_green/32/816_2.png) [@ken\_green](https://community.cartalk.com/u/ken_green)\
**Post date:** [March 22, 2010, 7:45pm UTC](https://community.cartalk.com/t/crown-vic-98-swaybar-bushing-size/46474/2 "2010-03-22T19:45:05Z")

</div>

Measure it.  
They’re talking outside diameter. ( Cheap plastic calipers available in a woodworking catalog, [leevalley.com](http://leevalley.com), has both metric & u.s. on one. )

( In the parts book it suggests the 29.5mm one has a bit of bend in the mid section and the 28.5mm one is straight across. )
