# Coupe ID? Familiar? **URL:** \ **Category:** General Discussion\ **Created:** [August 23, 2021, 11:39pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916 "2021-08-23T23:39:31Z")\ **Posts on this page:** 13\ **Page:** 2
**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\ **Post date:** [August 24, 2021, 4:16pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/21 "2021-08-24T16:16:46Z")
This was in MN. Owner must like jensens. ---
**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\ **Post date:** [August 24, 2021, 4:58pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/22 "2021-08-24T16:58:01Z")
It could have come from the UK. The car is old enough to avoid the safety requirements that would prevent more modern cars from importation. ---
**Author:** ![Scrapyard-John](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@Scrapyard-John](https://community.cartalk.com/u/Scrapyard-John)\ **Post date:** [August 24, 2021, 5:17pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/23 "2021-08-24T17:17:17Z")
Agree with all you said. In more modern times, GM engines are simpler than Ford engines. GM was (is) still doing cam in block and pushrods where Ford is OHC on most of their V8’s. Much easier to do a cam swap and power mods on GM. Mopar is cool, but seems to always be more expensive. So most people just building a car for power on a budget will just go GM. ---
**Author:** ![wentwest](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/wentwest/32/6073_2.png) [@wentwest](https://community.cartalk.com/u/wentwest)\ **Post date:** [August 25, 2021, 2:41pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/24 "2021-08-25T14:41:48Z")
If you’re digging that far into a vehicle that you’re replacing the engine, then the choices you make are completely yours. We know there are GM people and there are Mopar people and there are Ford people, and as far as I’m concerned I’m not concerned. It’s up to them. That’s one of the privileges of doing your own work. ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [August 26, 2021, 12:19am UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/25 "2021-08-26T00:19:33Z")
I’d like to put Jaguar XKE 6 into an early Mustang. 🙃 ---
**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\ **Post date:** [August 26, 2021, 12:21am UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/26 "2021-08-26T00:21:32Z")
> [@Mustangman](#): > > I’d like to put Jaguar XKE 6 into an early Mustang. What I would have given to have that in my '65, instead of the 170 cid ‘beast’. Of course, that would have gotten 16 year old me in LOTS of trouble… ---
**Author:** ![Purebred](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/purebred/32/46796_2.png) [@Purebred](https://community.cartalk.com/u/Purebred)\ **Post date:** [August 26, 2021, 12:20pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/27 "2021-08-26T12:20:55Z")
Mustangman/Texases Do either of you remember the build done by, I think, Popular Hot Rodding of a Pontiac OHC 6? They did a lot of mods and, again as I remember, three Webber’s on a custom built intake manifold. Came up with torque &HP numbers that were similar to the Jag six at a lower coat. Of course my memory is a little foggy after 50+ years since reading the article. ---
**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\ **Post date:** [August 26, 2021, 3:47pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/28 "2021-08-26T15:47:48Z")
I did see a rebuilt Jensen with a hemi, 5spd auto, irs, suspension, with $160k in receipts for sale. $89k. Not sure what value down the road might be. You have to want it, I guess. ![image](https://global.discourse-cdn.com/cartalk/original/3X/3/5/35541d5bd192c8188b40f6e3e3661a24c5a2ea3e.jpeg) ---
**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\ **Post date:** [August 26, 2021, 4:07pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/29 "2021-08-26T16:07:37Z")
> [@Cavell](#): > > with $160k in receipts for sale. $89k The rule of thumb I’ve seen is expect to get back about half the money you put into a restoration. This falls in line with that. ---
**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\ **Post date:** [August 26, 2021, 8:03pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/30 "2021-08-26T20:03:57Z")
Asking prices for Interceptors go up to $159,000 at Hemmings classifieds. The one you mention is shown there as well. I suspect that the price is much lower because it is a restomod. If it had been restored to new condition with the original engine, it could be worth over $100,000. Imagine that a fuel injected hemi may have reduced the value of the car. ---
**Author:** ![Cavell](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cavell/32/43396_2.png) [@Cavell](https://community.cartalk.com/u/Cavell)\ **Post date:** [August 26, 2021, 10:12pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/31 "2021-08-26T22:12:18Z")
I did see a 73 with an Edelbrock fuel injection system on a 440 in California. It looked solid. For $20 k ---
**Author:** ![VDCdriver](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/vdcdriver/32/48514_2.png) [@VDCdriver](https://community.cartalk.com/u/VDCdriver)\ **Post date:** [August 26, 2021, 10:21pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/32 "2021-08-26T22:21:58Z")
> [@Purebred](#): > > Do either of you remember the build done by, I think, Popular Hot Rodding of a Pontiac OHC 6? They did a lot of mods and, again as I remember, three Webber’s on a custom built intake manifold. Came up with torque &HP numbers that were similar to the Jag six at a lower coat. Of course my memory is a little foggy after 50+ years since reading the article. On a similar note, one of the car magazines (Car & Driver? Motor Trend?) built their own little hot rod sports car from the ground-up, by fabricating their own frame and then dropping a Slant Six–with every available performance modification–into it. The claimed performance was amazing. I’m pretty sure that they utilized existing front suspension components in addition to the Slant Six, but the chassis, rear suspension, and body design were original with them. Does anyone else remember this from the mid-late '60s? ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [August 26, 2021, 11:53pm UTC](https://community.cartalk.com/t/coupe-id-familiar/178916/33 "2021-08-26T23:53:41Z")
> [@Purebred](#): > > Do either of you remember the build done by, I think, Popular Hot Rodding of a Pontiac OHC 6? No, I would have been ALL over that article! That was a cool engine. My thought about a Jag 6 in a Mustang was; What if Ford bought Jaguar in the 60s when Lyons was retiring and looking for a buyer instead of waiting until the 90s. Would have given the Blue Oval a decent high performance 6 alongside their V8. [Previous page](https://community.cartalk.com/t/coupe-id-familiar/178916.md?page=1)