# Chysler lhs question

**URL:** <https://community.cartalk.com/t/chysler-lhs-question/10618>\
**Category:** Maintenance/Repairs\
**Created:** [February 13, 2008, 3:41pm UTC](https://community.cartalk.com/t/chysler-lhs-question/10618 "2008-02-13T15:41:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lennonfan74](https://avatars.discourse-cdn.com/v4/letter/l/b19c9b/32.png) [@lennonfan74](https://community.cartalk.com/u/lennonfan74)\
**Post date:** [February 13, 2008, 3:41pm UTC](https://community.cartalk.com/t/chysler-lhs-question/10618/1 "2008-02-13T15:41:43Z")

</div>

our 96 chrysler lhs needs a cradle to body isolator bushing replaced does anyone know if i need special tools or how hard it is to do

---

<div class="post-metadata">

**Author:** ![NYBo](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nybo/32/17281_2.png) [@NYBo](https://community.cartalk.com/u/NYBo)\
**Post date:** [February 13, 2008, 3:54pm UTC](https://community.cartalk.com/t/chysler-lhs-question/10618/2 "2008-02-13T15:54:42Z")

</div>

I’m not positive, but I think the job is pretty straightforward. Standard tools should be all that are required. If you don’t get a more specific answer here, sign up at [http://allpar.com](http://allpar.com) and head over to the LH forum.

---

<div class="post-metadata">

**Author:** ![lennonfan74](https://avatars.discourse-cdn.com/v4/letter/l/b19c9b/32.png) [@lennonfan74](https://community.cartalk.com/u/lennonfan74)\
**Post date:** [February 13, 2008, 3:58pm UTC](https://community.cartalk.com/t/chysler-lhs-question/10618/3 "2008-02-13T15:58:24Z")

</div>

thanks a lot