# Check Engine Light

**URL:** <https://community.cartalk.com/t/check-engine-light/16304>\
**Category:** Maintenance/Repairs\
**Created:** [July 6, 2008, 9:56pm UTC](https://community.cartalk.com/t/check-engine-light/16304 "2008-07-06T21:56:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarkHollngsworth](https://avatars.discourse-cdn.com/v4/letter/m/f04885/32.png) [@MarkHollngsworth](https://community.cartalk.com/u/MarkHollngsworth)\
**Post date:** [July 6, 2008, 9:56pm UTC](https://community.cartalk.com/t/check-engine-light/16304/1 "2008-07-06T21:56:36Z")

</div>

My 1992 Mazda B2600i p/u just reached 60,000 miles. The check engine light came on. How do I reset the light to turn it off after service is completed?

---

<div class="post-metadata">

**Author:** ![bobbyandberyl](https://avatars.discourse-cdn.com/v4/letter/b/bbce88/32.png) [@bobbyandberyl](https://community.cartalk.com/u/bobbyandberyl)\
**Post date:** [July 6, 2008, 11:03pm UTC](https://community.cartalk.com/t/check-engine-light/16304/2 "2008-07-06T23:03:12Z")

</div>

When the dealer/ repair shop completes the repair they reset the light (or they are supposed to).

---

<div class="post-metadata">

**Author:** ![hellokit](https://avatars.discourse-cdn.com/v4/letter/h/6a8cbe/32.png) [@hellokit](https://community.cartalk.com/u/hellokit)\
**Post date:** [July 7, 2008, 12:03am UTC](https://community.cartalk.com/t/check-engine-light/16304/3 "2008-07-07T00:03:14Z")

</div>

On older vehicles, you can, often, reset the light if you disconnect the battery for a minuet. On newer vehicles, a scan tool has to be used.

---

<div class="post-metadata">

**Author:** ![Joseph\_E\_Meehan](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/joseph_e_meehan/32/21_2.png) [@Joseph\_E\_Meehan](https://community.cartalk.com/u/Joseph_E_Meehan)\
**Post date:** [July 7, 2008, 12:27am UTC](https://community.cartalk.com/t/check-engine-light/16304/4 "2008-07-07T00:27:39Z")

</div>

And in some cases, it will go out after a few driving cycles.

Some auto part stores may be willing to reset it for you for free. I can’t remember, but I believe that a 1992 may be reset using a simple procedure. You might want to check your owner’s manual if you have it, or someone here may post the directions.

---

<div class="post-metadata">

**Author:** ![crankwalk5](https://avatars.discourse-cdn.com/v4/letter/c/3e96dc/32.png) [@crankwalk5](https://community.cartalk.com/u/crankwalk5)\
**Post date:** [July 7, 2008, 1:22am UTC](https://community.cartalk.com/t/check-engine-light/16304/5 "2008-07-07T01:22:36Z")

</div>

pull the cover off the right side of the knee bolster,and flip the switch.

out.

2600 in 1992?
