# Check eng light

**URL:** <https://community.cartalk.com/t/check-eng-light/86453>\
**Category:** Maintenance/Repairs\
**Created:** [August 7, 2014, 12:25am UTC](https://community.cartalk.com/t/check-eng-light/86453 "2014-08-07T00:25:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![D-Man](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/d-man/32/2667_2.png) [@D-Man](https://community.cartalk.com/u/D-Man)\
**Post date:** [August 7, 2014, 12:25am UTC](https://community.cartalk.com/t/check-eng-light/86453/1 "2014-08-07T00:25:28Z")

</div>

I have an '05 Honda hybrid with 75000 miles. Recrntly the check engine light came on; the code I pulled was P2000-NOx trap below effiency threshold, bank 1. Any suggestions?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [August 7, 2014, 12:31am UTC](https://community.cartalk.com/t/check-eng-light/86453/2 "2014-08-07T00:31:51Z")

</div>

The catalyst for NOx reduction in the three-way catalytic converter has failed.

[http://www.discountconverter.com/tech-tips/news\_page.cfm?Key=catalytic\_converter-&News=227](http://www.discountconverter.com/tech-tips/news_page.cfm?Key=catalytic_converter-&News=227)

Tester

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [August 7, 2014, 3:42am UTC](https://community.cartalk.com/t/check-eng-light/86453/3 "2014-08-07T03:42:32Z")

</div>

Honda issued a bulletin for P2000;

11-042 August 17, 2011  
Applies To:  
2003-05 Civic Hybrid ULEV (KA) - Check the iN VIN status for eligibility

MIL Comes On With DTC P1420 or P2000

SYMPTOM  
The MIL comes on with one of the following DTCs:

2003 models - DTC P1420 (NOx Adsorptive Catalytic System Efficiency Below Threshold)

2004-05 models - DTC P2000 (NOx Adsorptive Catalytic System Efficiency Below Threshold)

PROBABLE CAUSE  
The secondary heated oxygen sensor is deteriorated, and the PGM-FI software misinterprets its input as a deteriorated NOx adsorptive three-way catalytic converter and sets DTC P1420 or P2000.

CORRECTIVE ACTION  
Replace both the secondary and third heated oxygen sensors.  
NOTE : To prevent a comeback, make sure you replace both of the sensors.

PARTS INFORMATION  
Oxygen Sensor Kit: P/N 06365-PZA-A00  
(Includes the secondary and third heated oxygen sensors)
