# Changing front turn signal bulb on 2005 Grand Prix GT

**URL:** <https://community.cartalk.com/t/changing-front-turn-signal-bulb-on-2005-grand-prix-gt/28553>\
**Category:** Maintenance/Repairs\
**Created:** [March 31, 2009, 12:18am UTC](https://community.cartalk.com/t/changing-front-turn-signal-bulb-on-2005-grand-prix-gt/28553 "2009-03-31T00:18:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![PontiacGPGT](https://avatars.discourse-cdn.com/v4/letter/p/898d66/32.png) [@PontiacGPGT](https://community.cartalk.com/u/PontiacGPGT)\
**Post date:** [March 31, 2009, 12:18am UTC](https://community.cartalk.com/t/changing-front-turn-signal-bulb-on-2005-grand-prix-gt/28553/1 "2009-03-31T00:18:06Z")

</div>

Manual seems to indicate necessity to remove entire multiple light assembly (after removing obstructing structural hardware - which is not mentioned). The turn signal light is in a lower shroud accessible from the front by two screws. Anybody know anything?

---

<div class="post-metadata">

**Author:** ![hellokit](https://avatars.discourse-cdn.com/v4/letter/h/6a8cbe/32.png) [@hellokit](https://community.cartalk.com/u/hellokit)\
**Post date:** [March 31, 2009, 1:15pm UTC](https://community.cartalk.com/t/changing-front-turn-signal-bulb-on-2005-grand-prix-gt/28553/2 "2009-03-31T13:15:13Z")

</div>

I disavow having any knowledge on how to do this. Maybe, from underneath the car?

---

<div class="post-metadata">

**Author:** ![PontiacGPGT](https://avatars.discourse-cdn.com/v4/letter/p/898d66/32.png) [@PontiacGPGT](https://community.cartalk.com/u/PontiacGPGT)\
**Post date:** [March 31, 2009, 3:49pm UTC](https://community.cartalk.com/t/changing-front-turn-signal-bulb-on-2005-grand-prix-gt/28553/3 "2009-03-31T15:49:10Z")

</div>

I was right for a change. I removed the two screws and was able to access the lower lamps. I changed it without incident. AutoZone was pushing bulb socket lubricant. Any comments?