# Chamfered brake pads **URL:** \ **Category:** Maintenance/Repairs\ **Created:** [November 26, 2014, 8:53pm UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183 "2014-11-26T20:53:33Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![JuniorMint](https://avatars.discourse-cdn.com/v4/letter/j/5fc32e/32.png) [@JuniorMint](https://community.cartalk.com/u/JuniorMint)\ **Post date:** [November 26, 2014, 8:53pm UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/1 "2014-11-26T20:53:33Z")
I saw someone filing their new brake pads. I think it was on the leading and trailing edges, at 45 degrees, and only taking the height down by no more than 5-10%. I imagine this helps keep the pad flat on the rotor whilst braking, and helps break in the pads. Is that sensible? Do some new pads come that way? Anyone care to comment? ---
**Author:** ![MY\_2\_CENTS](https://avatars.discourse-cdn.com/v4/letter/m/22d042/32.png) [@MY\_2\_CENTS](https://community.cartalk.com/u/MY_2_CENTS)\ **Post date:** [November 26, 2014, 9:03pm UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/2 "2014-11-26T21:03:17Z")
Some pads DO come that way. ---
**Author:** ![the\_same\_mountainbike](https://avatars.discourse-cdn.com/v4/letter/t/c89c15/32.png) [@the\_same\_mountainbike](https://community.cartalk.com/u/the_same_mountainbike)\ **Post date:** [November 26, 2014, 9:10pm UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/3 "2014-11-26T21:10:05Z")
Some pads come that way, but I can’t see doing it to pads that don’t. Can’t hurt anything that I can see, however, unless one gets too excited with the file. ---
**Author:** ![Mustangman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/mustangman/32/44130_2.png) [@Mustangman](https://community.cartalk.com/u/Mustangman)\ **Post date:** [November 26, 2014, 9:23pm UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/4 "2014-11-26T21:23:51Z")
The chamfer is designed to reduce brake squeal. Some pads will “ring” when at full thickness and reducing the contact length when at full thickness by adding a chamfer can help this. As it wears down the pad no longer “rings” and can take the full length. As other posters here have said, some pads come that way. Some pads have a slot cut in the middle to help this, too. Some mechanics will add their own because they think it will reduce bring-backs for noise. ---
**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\ **Post date:** [November 26, 2014, 10:54pm UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/5 "2014-11-26T22:54:56Z")
The Delcos I put on recently were that way. ---
**Author:** ![JuniorMint](https://avatars.discourse-cdn.com/v4/letter/j/5fc32e/32.png) [@JuniorMint](https://community.cartalk.com/u/JuniorMint)\ **Post date:** [November 27, 2014, 12:18am UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/6 "2014-11-27T00:18:34Z")
@Mustangman makes sense - my pads have a slot but no chamfer. Never understood til now. ---
**Author:** ![missileman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/missileman/32/1366_2.png) [@missileman](https://community.cartalk.com/u/missileman)\ **Post date:** [November 27, 2014, 2:34am UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/7 "2014-11-27T02:34:47Z")
I never understood the need for the chamfer since better stopping power is had by more pad contacting the rotor surface. Thanks @Mustangman now I know why they are made that way. ---
**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\ **Post date:** [November 27, 2014, 7:08am UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/8 "2014-11-27T07:08:47Z")
I’ll add some of my observations Over the years, I have not noticed that the chamfers or slots have reduced noise whatsoever That goes for factory AND aftermarket brakes, semimetallic and ceramic Some of the best brake pads had no slots and no chamfers, and they were quiet, all the way down until they hit the audible wear indicators When I see guys chamfering brake pads before installation, I walk far away and laugh, so that the guy can’t hear me. If it makes the guy feel good, fine But I don’t chamfer brake pads. I don’t modify brake pads. I install them with shims and brake paste, if applicable No problems yet That 10 minutes that those guys spend adding a chamfer, I spend that time getting started on the next job ---
**Author:** ![ok4450](https://avatars.discourse-cdn.com/v4/letter/o/e9bcb4/32.png) [@ok4450](https://community.cartalk.com/u/ok4450)\ **Post date:** [November 27, 2014, 8:39am UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/9 "2014-11-27T08:39:14Z")
I’ve always chamfered and slotted pads that did not come that way out of the box. I also don’t think that I’ve ever spent more than 3-4 minutes to chamfer and slot a full set. If it helps one iota in regards to brake function, longevity, and noise issues then it’s 3-4 minutes worth eating is the way I look at it. EBC (one of the larger brake manufacturing companies) explains far better than I can why chamfering and slotting can help. [http://ebcbrakes.com/articles/squeaky-brakes/](http://ebcbrakes.com/articles/squeaky-brakes/) ---
**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\ **Post date:** [November 28, 2014, 12:24am UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/10 "2014-11-28T00:24:09Z")
Were the pads without the chamfer cheap replacement pads? ---
**Author:** ![JuniorMint](https://avatars.discourse-cdn.com/v4/letter/j/5fc32e/32.png) [@JuniorMint](https://community.cartalk.com/u/JuniorMint)\ **Post date:** [November 28, 2014, 7:48pm UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/11 "2014-11-28T19:48:38Z")
@‌jtsanders I could / did not see detail of the pads being filed. The pads I have are Textar and Porsche (front and rear, respectively, low and high price, respectively) ---
**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\ **Post date:** [November 28, 2014, 10:10pm UTC](https://community.cartalk.com/t/chamfered-brake-pads/88183/12 "2014-11-28T22:10:47Z")
@JuniorMint‌ Textar has . . . at times . . . been the OEM for some european auto manufacturers