# Cavalier rattle will not resolve

**URL:** <https://community.cartalk.com/t/cavalier-rattle-will-not-resolve/50834>\
**Category:** Maintenance/Repairs\
**Tags:** chevrolet, coupe, cavalier\
**Created:** [June 25, 2010, 1:41am UTC](https://community.cartalk.com/t/cavalier-rattle-will-not-resolve/50834 "2010-06-25T01:41:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![carlkeys](https://avatars.discourse-cdn.com/v4/letter/c/b38774/32.png) [@carlkeys](https://community.cartalk.com/u/carlkeys)\
**Post date:** [June 25, 2010, 1:41am UTC](https://community.cartalk.com/t/cavalier-rattle-will-not-resolve/50834/1 "2010-06-25T01:41:07Z")

</div>

2 yrs ago hit pothole w/ RT front tire, when slowing to stop sign. RT front oscillating sounding rattle since. New bushings put in. Steers fine. Handles fine. Want to sell, but need to eliminate rattle. Thoughts?

---

<div class="post-metadata">

**Author:** ![researcher](https://avatars.discourse-cdn.com/v4/letter/r/edb3f5/32.png) [@researcher](https://community.cartalk.com/u/researcher)\
**Post date:** [June 25, 2010, 5:58pm UTC](https://community.cartalk.com/t/cavalier-rattle-will-not-resolve/50834/2 "2010-06-25T17:58:43Z")

</div>

When you say 'New bushings put in.", were the stablizer bar insulators and the stablizer link on the right side replaced? I would look closely at those.

Can you get the rattle as you work the right front fender up and down?

Hope to help.

---

<div class="post-metadata">

**Author:** ![edb1961](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/edb1961/32/122_2.png) [@edb1961](https://community.cartalk.com/u/edb1961)\
**Post date:** [June 25, 2010, 6:52pm UTC](https://community.cartalk.com/t/cavalier-rattle-will-not-resolve/50834/3 "2010-06-25T18:52:09Z")

</div>

Check the hood hinge bolts. My 2000 Blazer developed a tremendous rattle after hitting a few major pot holes in Philly. Over time the hinge bolt increases the size of the hole causing the hinge to rattle.

Shove a piece of cardboard between the fender and the hood in the hinge area. You can either tighten the hinge bolt or add a set of conical washers to fill the gap between the bolt and the hole. I used the washers to fix the rattle.

Here’s a link with the TSB explaining the rattle

[http://www.mombu.com/chevrolet/chevrolet/t-s-10-rattle-962326-last.html](http://www.mombu.com/chevrolet/chevrolet/t-s-10-rattle-962326-last.html)

Ed B.
