# Car Shake/Vibrate after replacing a water pump

**URL:** <https://community.cartalk.com/t/car-shake-vibrate-after-replacing-a-water-pump/85336>\
**Category:** Maintenance/Repairs\
**Created:** [June 7, 2014, 9:45pm UTC](https://community.cartalk.com/t/car-shake-vibrate-after-replacing-a-water-pump/85336 "2014-06-07T21:45:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![awdangit](https://avatars.discourse-cdn.com/v4/letter/a/ea5d25/32.png) [@awdangit](https://community.cartalk.com/u/awdangit)\
**Post date:** [June 7, 2014, 9:45pm UTC](https://community.cartalk.com/t/car-shake-vibrate-after-replacing-a-water-pump/85336/1 "2014-06-07T21:45:18Z")

</div>

My father-in-law and I replaced the water pump on my 2007 Ponitac Vibe. After we replaced the antifreeze and turned the car on, the car started vibrating (visible in the hood while it was still up and the plastic in the door was rattling a little) after about 3-5 minutes of idling (in neutral-the car is a manual).

Any suggestions as to what we missed? Is this normal?

---

<div class="post-metadata">

**Author:** ![PvtPublic](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/pvtpublic/32/13089_2.png) [@PvtPublic](https://community.cartalk.com/u/PvtPublic)\
**Post date:** [June 7, 2014, 9:57pm UTC](https://community.cartalk.com/t/car-shake-vibrate-after-replacing-a-water-pump/85336/2 "2014-06-07T21:57:56Z")

</div>

Maybe you bumped an electrical or vacuum connector loose?

---

<div class="post-metadata">

**Author:** ![awdangit](https://avatars.discourse-cdn.com/v4/letter/a/ea5d25/32.png) [@awdangit](https://community.cartalk.com/u/awdangit)\
**Post date:** [June 7, 2014, 10:02pm UTC](https://community.cartalk.com/t/car-shake-vibrate-after-replacing-a-water-pump/85336/3 "2014-06-07T22:02:49Z")

</div>

Thank you for the reply. We’ll go back and check the area that we were working in.

---

<div class="post-metadata">

**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\
**Post date:** [June 8, 2014, 12:21am UTC](https://community.cartalk.com/t/car-shake-vibrate-after-replacing-a-water-pump/85336/4 "2014-06-08T00:21:01Z")

</div>

Did you disconnect the battery? I broke off an engine temp sensor once changing an alternator on the side of the road so agree go back and check everything in the area.

---

<div class="post-metadata">

**Author:** ![the\_same\_mountainbike](https://avatars.discourse-cdn.com/v4/letter/t/c89c15/32.png) [@the\_same\_mountainbike](https://community.cartalk.com/u/the_same_mountainbike)\
**Post date:** [June 8, 2014, 9:49am UTC](https://community.cartalk.com/t/car-shake-vibrate-after-replacing-a-water-pump/85336/5 "2014-06-08T09:49:18Z")

</div>

Definitely check all your work including the serpentine belt routing and belt tension. Also check the pulley alignment and look to see if you can visually identify what’s vibrating.

Did you use a new pump or a rebuilt one?
