# Can you solve the mystery part !?

**URL:** <https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398>\
**Category:** Maintenance/Repairs\
**Created:** [July 23, 2024, 5:25am UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398 "2024-07-23T05:25:13Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![Erikmarko72\_186627](https://avatars.discourse-cdn.com/v4/letter/e/0ea827/32.png) [@Erikmarko72\_186627](https://community.cartalk.com/u/Erikmarko72_186627)\
**Post date:** [July 23, 2024, 5:25am UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/1 "2024-07-23T05:25:13Z")

</div>

Guys I was changing a starter on my 2006 Mazda 3 moving some cables under the car and this thing fell to the ground from somewhere in the engine bay. Does anybody know what it is, where was it attached and is it important? Please see the picture. Thanks

 ![IMG20240722220821](https://global.discourse-cdn.com/cartalk/original/3X/f/8/f8f0b7c97a8566401efe1b38a2f9143bd70cb2d8.jpeg)

---

<div class="post-metadata">

**Author:** ![ChrisTheTireWhisperer](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/christhetirewhisperer/32/34798_2.png) [@ChrisTheTireWhisperer](https://community.cartalk.com/u/ChrisTheTireWhisperer)\
**Post date:** [July 23, 2024, 11:45am UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/2 "2024-07-23T11:45:02Z")

</div>

Cable/wire retaining clip.

Attaches to larger hose or pipe, wires retained through other opening.

---

<div class="post-metadata">

**Author:** ![davesmopar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/davesmopar/32/41750_2.png) [@davesmopar](https://community.cartalk.com/u/davesmopar)\
**Post date:** [July 23, 2024, 4:33pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/3 "2024-07-23T16:33:13Z")

</div>

Heck, it could be something that ran over in the road and blew up in the engine compartment and just happen to fall out while doing the starter…  
Or what Chris said… lol

---

<div class="post-metadata">

**Author:** ![Erikmarko72\_186627](https://avatars.discourse-cdn.com/v4/letter/e/0ea827/32.png) [@Erikmarko72\_186627](https://community.cartalk.com/u/Erikmarko72_186627)\
**Post date:** [July 23, 2024, 5:00pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/4 "2024-07-23T17:00:00Z")

</div>

At first I thought that too but it is not a simple clip on hose/wires thing. You can see all kinds of tabs and notches on it. 🤔

---

<div class="post-metadata">

**Author:** ![STZ](https://avatars.discourse-cdn.com/v4/letter/s/53a042/32.png) [@STZ](https://community.cartalk.com/u/STZ)\
**Post date:** [July 23, 2024, 6:18pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/5 "2024-07-23T18:18:29Z")

</div>

> [@Erikmarko72\_186627](#):
>
> is it important

You’ll find out!

If it’s a wiring holder, how did it fall off? It should be hanging with the wire through that closed opening.

Being such flimsy plastic, and that it fell out of a Mazda, it’s probably something critical; start saving for a new engine.

Edit: The coolant temp sensor in a Ford Escape has the cheapest, flimsiest, plastic piece to stop it from popping out…unbelievably bad design…I added wire to make sure it would never pop out.

---

<div class="post-metadata">

**Author:** ![Erikmarko72\_186627](https://avatars.discourse-cdn.com/v4/letter/e/0ea827/32.png) [@Erikmarko72\_186627](https://community.cartalk.com/u/Erikmarko72_186627)\
**Post date:** [July 23, 2024, 6:37pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/6 "2024-07-23T18:37:45Z")

</div>

S TZ, you are making me nervous! Are you serious or joking?

---

<div class="post-metadata">

**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\
**Post date:** [July 23, 2024, 6:48pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/7 "2024-07-23T18:48:06Z")

</div>

If that was loose and fell out, I wouldn’t worry about it. I was about to ask if the cables and hoses look to be in the correct locations, but that can be very hard to tell. You could drop by a Mazda dealer parts counter and see if they recognize it. How big is it?

---

<div class="post-metadata">

**Author:** ![VOLVO-V70](https://avatars.discourse-cdn.com/v4/letter/v/8e8cbc/32.png) [@VOLVO-V70](https://community.cartalk.com/u/VOLVO-V70)\
**Post date:** [July 23, 2024, 7:55pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/8 "2024-07-23T19:55:08Z")

</div>

> [@STZ](#):
>
> Being such flimsy plastic, and that it fell out of a Mazda, it’s probably something critical; start saving for a new engine.
> 
> Edit: The coolant temp sensor in a Ford Escape has the cheapest, flimsiest, plastic piece to stop it from popping out…unbelievably bad design…I added wire to make sure it would never pop out.

You really are not much help to people asking questions . That strange plastic thing is not going to kill the engine and this person is not asking about a Ford.

---

<div class="post-metadata">

**Author:** ![Erikmarko72\_186627](https://avatars.discourse-cdn.com/v4/letter/e/0ea827/32.png) [@Erikmarko72\_186627](https://community.cartalk.com/u/Erikmarko72_186627)\
**Post date:** [July 23, 2024, 8:08pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/9 "2024-07-23T20:08:52Z")

</div>

its about a ring size loop.

---

<div class="post-metadata">

**Author:** ![Erikmarko72\_186627](https://avatars.discourse-cdn.com/v4/letter/e/0ea827/32.png) [@Erikmarko72\_186627](https://community.cartalk.com/u/Erikmarko72_186627)\
**Post date:** [July 23, 2024, 8:10pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/10 "2024-07-23T20:10:52Z")

</div>

and it doesn’t look like it broke off of something.

---

<div class="post-metadata">

**Author:** ![Nevada\_545](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/nevada_545/32/41232_2.png) [@Nevada\_545](https://community.cartalk.com/u/Nevada_545)\
**Post date:** [July 23, 2024, 8:29pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/11 "2024-07-23T20:29:15Z")

</div>

Retaining clip with pull ring. The pull ring suggests that this was to be removed during installation of a part. Where did you find this clip?

---

<div class="post-metadata">

**Author:** ![Erikmarko72\_186627](https://avatars.discourse-cdn.com/v4/letter/e/0ea827/32.png) [@Erikmarko72\_186627](https://community.cartalk.com/u/Erikmarko72_186627)\
**Post date:** [July 23, 2024, 8:38pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/12 "2024-07-23T20:38:42Z")

</div>

it fell to the ground from the engine bay driver size around battery when I was installing a starter underneath.

---

<div class="post-metadata">

**Author:** ![George\_San\_Jose1](https://avatars.discourse-cdn.com/v4/letter/g/e5b9ba/32.png) [@George\_San\_Jose1](https://community.cartalk.com/u/George_San_Jose1)\
**Post date:** [July 23, 2024, 10:02pm UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/13 "2024-07-23T22:02:59Z")

</div>

I’ve never seen anything like that used in any of my cars. Is it broken, or does the loop-catch still work? If the catch still works, I expect it was used to secure some of the wiring near to the battery.

---

<div class="post-metadata">

**Author:** ![jtsanders](https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/32.png) [@jtsanders](https://community.cartalk.com/u/jtsanders)\
**Post date:** [July 24, 2024, 12:47am UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/14 "2024-07-24T00:47:01Z")

</div>

> [@George\_San\_Jose1](#):
>
> I expect it was used to secure some of the wiring near to the battery.

I doubt that the white plastic part holds any wires or tubing. If it does, then how could it fall off? The ring at the top is closed and would still be hanging off those wires if the clasp at the bottom came loose.

---

<div class="post-metadata">

**Author:** ![Erikmarko72\_186627](https://avatars.discourse-cdn.com/v4/letter/e/0ea827/32.png) [@Erikmarko72\_186627](https://community.cartalk.com/u/Erikmarko72_186627)\
**Post date:** [July 24, 2024, 6:40am UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/15 "2024-07-24T06:40:33Z")

</div>

good point, nothing was going through the closed loop I would say too.

---

<div class="post-metadata">

**Author:** ![Erikmarko72\_186627](https://avatars.discourse-cdn.com/v4/letter/e/0ea827/32.png) [@Erikmarko72\_186627](https://community.cartalk.com/u/Erikmarko72_186627)\
**Post date:** [July 24, 2024, 6:45am UTC](https://community.cartalk.com/t/can-you-solve-the-mystery-part/195398/16 "2024-07-24T06:45:42Z")

</div>

I’m sure what you mean does it work? The piece is in one piece and its not broken.
