# Camry Rear Door

**URL:** <https://community.cartalk.com/t/camry-rear-door/121608>\
**Category:** Maintenance/Repairs\
**Tags:** toyota, camry\
**Created:** [July 24, 2018, 3:33pm UTC](https://community.cartalk.com/t/camry-rear-door/121608 "2018-07-24T15:33:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![FeWix](https://avatars.discourse-cdn.com/v4/letter/f/f0a364/32.png) [@FeWix](https://community.cartalk.com/u/FeWix)\
**Post date:** [July 24, 2018, 3:33pm UTC](https://community.cartalk.com/t/camry-rear-door/121608/1 "2018-07-24T15:33:53Z")

</div>

I am considering replacing one of the (damaged) rear doors on my 2001 Camry. If I loosen up and disconnect the rubber bootie holding the wiring is there going to be a connector behind it that I can disconnect prior to removing the door?

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [July 24, 2018, 3:39pm UTC](https://community.cartalk.com/t/camry-rear-door/121608/2 "2018-07-24T15:39:37Z")

</div>

Unplug the window switch in the arm rest.

The wiring can now be pulled out of the door.

Tester

---

<div class="post-metadata">

**Author:** ![DS777](https://avatars.discourse-cdn.com/v4/letter/d/e36b37/32.png) [@DS777](https://community.cartalk.com/u/DS777)\
**Post date:** [July 25, 2018, 6:55pm UTC](https://community.cartalk.com/t/camry-rear-door/121608/3 "2018-07-25T18:55:24Z")

</div>

NO - there is never a connector inside the section of wiring that runs thru the rubber booty. That is a flexible area - for opening or closing the door.

You have to ‘open up’ access to inside the door. Depending on if this is a side passenger door; or a tail or hatch back door - you might have to move/adjust various stuff - like the window glass. You should obtain a repair manual for your vehicle - at a minimum - something like Hanes or Chilton’s. Factory is best. Talk with Toyota for one; or visit ‘books4cars’ .com or ebay; etc. A manual will detail where all the hidden fasteners are; and how to get to the plug to undo the main wiring harness plug. You then have to feed that out of the door - so it is good that you have the rubber wiring bootie protector loose…

---

<div class="post-metadata">

**Author:** ![COROLLAGUY1](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/corollaguy1/32/7575_2.png) [@COROLLAGUY1](https://community.cartalk.com/u/COROLLAGUY1)\
**Post date:** [July 26, 2018, 4:03pm UTC](https://community.cartalk.com/t/camry-rear-door/121608/4 "2018-07-26T16:03:44Z")

</div>

The wires goes inside a conduit to protect them like in my picture.The connectors are at each end of the wires

 ![image](https://global.discourse-cdn.com/cartalk/original/2X/0/0925a8d667b2602f45c312a2dc156cfcddba4653.jpg)