# Camry rack & pinion dust boot

**URL:** <https://community.cartalk.com/t/camry-rack-pinion-dust-boot/81179>\
**Category:** Maintenance/Repairs\
**Created:** [September 2, 2013, 1:50am UTC](https://community.cartalk.com/t/camry-rack-pinion-dust-boot/81179 "2013-09-02T01:50:18Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [September 5, 2013, 7:20pm UTC](https://community.cartalk.com/t/camry-rack-pinion-dust-boot/81179/21 "2013-09-05T19:20:45Z")

</div>

@bzb

Any decent parts store will stock the correct clamp . . . I’m talking about the big inner one, the one that needs to be crimped down with the special pliers

The inner clamp can’t be reused. You basically have to destroy it to remove it. The outer clamp, however, can usually be reused

A mechanic should only use a pickle fork on a tie rod end/ball joint that’s getting replaced

Good luck!

[Previous page](https://community.cartalk.com/t/camry-rack-pinion-dust-boot/81179.md?page=1)
