# Cam Positioning sensor

**URL:** <https://community.cartalk.com/t/cam-positioning-sensor/48092>\
**Category:** Maintenance/Repairs\
**Tags:** chrysler, belts, sensors, engines, timing-belts, lights\
**Created:** [April 28, 2010, 7:37pm UTC](https://community.cartalk.com/t/cam-positioning-sensor/48092 "2010-04-28T19:37:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ghidorah1964](https://avatars.discourse-cdn.com/v4/letter/g/e47774/32.png) [@Ghidorah1964](https://community.cartalk.com/u/Ghidorah1964)\
**Post date:** [April 28, 2010, 7:37pm UTC](https://community.cartalk.com/t/cam-positioning-sensor/48092/1 "2010-04-28T19:37:35Z")

</div>

Check engine light on. Computer says it’s the ‘Cam-Positioning Sensor’. Replaced it, reset engine light. Engine light came back on after driving a few miles. Replaced sensor again assuming previous one was faulty & car computer still states that it’s the Cam-Positioning Sensor. Replaced timing belt & water pump (needed it anyway), light still on. Please help.