# Cam bearing oil feed hole locations

**URL:** <https://community.cartalk.com/t/cam-bearing-oil-feed-hole-locations/71183>\
**Category:** Maintenance/Repairs\
**Tags:** chevrolet, malibu\
**Created:** [February 28, 2012, 3:33am UTC](https://community.cartalk.com/t/cam-bearing-oil-feed-hole-locations/71183 "2012-02-28T03:33:50Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![frost1085](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/frost1085/32/1285_2.png) [@frost1085](https://community.cartalk.com/u/frost1085)\
**Post date:** [February 28, 2012, 3:33am UTC](https://community.cartalk.com/t/cam-bearing-oil-feed-hole-locations/71183/1 "2012-02-28T03:33:50Z")

</div>

need help on the cam bearings oil hole location. on my sbc 350. 1-5 especially the first one becouse it has 2 holes if u can give them to me with the block upside down that would be best thanks

were should the bearings holes be facing when i put them in especially number one becouse it has to holes

1-5 oclock position and number one it has 2 holes

---

<div class="post-metadata">

**Author:** ![Honda-Blackbird](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/honda-blackbird/32/3159_2.png) [@Honda-Blackbird](https://community.cartalk.com/u/Honda-Blackbird)\
**Post date:** [February 28, 2012, 3:50am UTC](https://community.cartalk.com/t/cam-bearing-oil-feed-hole-locations/71183/2 "2012-02-28T03:50:53Z")

</div>

What year is the block…4 bolt mains or 2?

Blackbird

---

<div class="post-metadata">

**Author:** ![frost1085](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/frost1085/32/1285_2.png) [@frost1085](https://community.cartalk.com/u/frost1085)\
**Post date:** [February 28, 2012, 3:51am UTC](https://community.cartalk.com/t/cam-bearing-oil-feed-hole-locations/71183/3 "2012-02-28T03:51:59Z")

</div>

its a 93 2 bolt main

---

<div class="post-metadata">

**Author:** ![mark9207](https://avatars.discourse-cdn.com/v4/letter/m/71c47a/32.png) [@mark9207](https://community.cartalk.com/u/mark9207)\
**Post date:** [February 28, 2012, 4:41am UTC](https://community.cartalk.com/t/cam-bearing-oil-feed-hole-locations/71183/4 "2012-02-28T04:41:47Z")

</div>

Next time, just give them to the guys at the machine shop and have them install them. They have the special tool and have done it a million times, and usually do not charge for this service if you are having machine work done anyway.

---

<div class="post-metadata">

**Author:** ![frost1085](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/frost1085/32/1285_2.png) [@frost1085](https://community.cartalk.com/u/frost1085)\
**Post date:** [February 28, 2012, 6:56am UTC](https://community.cartalk.com/t/cam-bearing-oil-feed-hole-locations/71183/5 "2012-02-28T06:56:19Z")

</div>

yea, lol this my first build and im doin it on my owns so i get a pass lol

---

<div class="post-metadata">

**Author:** ![frost1085](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/frost1085/32/1285_2.png) [@frost1085](https://community.cartalk.com/u/frost1085)\
**Post date:** [February 28, 2012, 7:19am UTC](https://community.cartalk.com/t/cam-bearing-oil-feed-hole-locations/71183/6 "2012-02-28T07:19:52Z")

</div>

just finished installing the bearings turned out to be pretty easy with the tool