# Buick Crankshaft

**URL:** <https://community.cartalk.com/t/buick-crankshaft/82335>\
**Category:** Maintenance/Repairs\
**Tags:** buick\
**Created:** [November 22, 2013, 6:42am UTC](https://community.cartalk.com/t/buick-crankshaft/82335 "2013-11-22T06:42:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ailimac](https://avatars.discourse-cdn.com/v4/letter/a/f05b48/32.png) [@ailimac](https://community.cartalk.com/u/ailimac)\
**Post date:** [November 22, 2013, 6:42am UTC](https://community.cartalk.com/t/buick-crankshaft/82335/1 "2013-11-22T06:42:28Z")

</div>

I am swapping my 1947 Buick Special Series 40 Sedanette 248CI engine with a manual trans to a 1952 263 CI engine that had a Dynaflow trans. Before I can complete the swap I need to change the crankshaft on the 263 to fit the manual trans. Does anyone know if the 248 crank will fit in the 263?  
Or, does anyone know where I might be able to find technical information about what cranks I may be able to use.  
Thanks.  
Pete

---

<div class="post-metadata">

**Author:** ![Wha-Who](https://avatars.discourse-cdn.com/v4/letter/w/9f8e36/32.png) [@Wha-Who](https://community.cartalk.com/u/Wha-Who)\
**Post date:** [November 22, 2013, 7:52am UTC](https://community.cartalk.com/t/buick-crankshaft/82335/2 "2013-11-22T07:52:48Z")

</div>

Try Hollander Interchange

---

<div class="post-metadata">

**Author:** ![texases](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/texases/32/862_2.png) [@texases](https://community.cartalk.com/u/texases)\
**Post date:** [November 22, 2013, 8:06am UTC](https://community.cartalk.com/t/buick-crankshaft/82335/3 "2013-11-22T08:06:52Z")

</div>

You might also check out [hemmings.com](http://hemmings.com), find shops that deal with old Buicks.

---

<div class="post-metadata">

**Author:** ![ok4450](https://avatars.discourse-cdn.com/v4/letter/o/e9bcb4/32.png) [@ok4450](https://community.cartalk.com/u/ok4450)\
**Post date:** [November 22, 2013, 8:59am UTC](https://community.cartalk.com/t/buick-crankshaft/82335/4 "2013-11-22T08:59:37Z")

</div>

Keeping in mind that I’m not that knowledgeable on stuff this old, I would say the cranks are not interchangeable based on the journal specifications.

Rod journal diameters on the 263 are shown to be larger than the 248 and for some reason I will never, ever comprehend, the specs show that the 248 uses 5 different main journal diameters with the size increasing (considerably) from journals 1 through 5.  
The 263 is shown as having the same size main journals.

It would be interesting to travel back in time and ask the engineers WTH they were thinking…

---

<div class="post-metadata">

**Author:** ![VDCdriver](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/vdcdriver/32/48514_2.png) [@VDCdriver](https://community.cartalk.com/u/VDCdriver)\
**Post date:** [November 22, 2013, 6:39pm UTC](https://community.cartalk.com/t/buick-crankshaft/82335/5 "2013-11-22T18:39:40Z")

</div>

In each monthly issue of _Hemmings Classic Car_ magazine, their Tech Talk columnist, Mike McNessor, answers technical questions like this one. You can submit your question to him at the following e-mail address:  
[mmcnessor@hemmings.com](mailto:mmcnessor@hemmings.com)

His advice is both free and expert, but you have to be willing to wait a bit for that free advice…
