# Brakes

**URL:** <https://community.cartalk.com/t/brakes/62266>\
**Category:** Maintenance/Repairs\
**Tags:** pontiac\
**Created:** [March 5, 2011, 11:11pm UTC](https://community.cartalk.com/t/brakes/62266 "2011-03-05T23:11:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![romie77](https://avatars.discourse-cdn.com/v4/letter/r/e480ec/32.png) [@romie77](https://community.cartalk.com/u/romie77)\
**Post date:** [March 5, 2011, 11:11pm UTC](https://community.cartalk.com/t/brakes/62266/1 "2011-03-05T23:11:38Z")

</div>

i just changed pads and roters now the car will not move like something is holding it back it seems to only come from the driverside and i now notice that when i tightened the lugnuts that wheel was not moving

---

<div class="post-metadata">

**Author:** ![williamclang](https://avatars.discourse-cdn.com/v4/letter/w/6f9a4e/32.png) [@williamclang](https://community.cartalk.com/u/williamclang)\
**Post date:** [March 6, 2011, 12:10am UTC](https://community.cartalk.com/t/brakes/62266/2 "2011-03-06T00:10:10Z")

</div>

It sounds like a caliper is hung up. Take the brakes off again and see if anything not put on right.

---

<div class="post-metadata">

**Author:** ![romie77](https://avatars.discourse-cdn.com/v4/letter/r/e480ec/32.png) [@romie77](https://community.cartalk.com/u/romie77)\
**Post date:** [March 6, 2011, 12:48am UTC](https://community.cartalk.com/t/brakes/62266/3 "2011-03-06T00:48:29Z")

</div>

thanks for the response i did remove it with no lucknext i will remove everything and see if the hub turns ?

---

<div class="post-metadata">

**Author:** ![mark9207](https://avatars.discourse-cdn.com/v4/letter/m/71c47a/32.png) [@mark9207](https://community.cartalk.com/u/mark9207)\
**Post date:** [March 6, 2011, 2:00am UTC](https://community.cartalk.com/t/brakes/62266/4 "2011-03-06T02:00:40Z")

</div>

Make sure you didn’t mount a caliper with a twist in the brake hose. That will cause either dragging or locking of the caliper.