# Brake Work

**URL:** <https://community.cartalk.com/t/brake-work/90810>\
**Category:** Maintenance/Repairs\
**Created:** [August 4, 2015, 5:53am UTC](https://community.cartalk.com/t/brake-work/90810 "2015-08-04T05:53:27Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![meanjoe75fan](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/meanjoe75fan/32/552_2.png) [@meanjoe75fan](https://community.cartalk.com/u/meanjoe75fan)\
**Post date:** [August 6, 2015, 10:44am UTC](https://community.cartalk.com/t/brake-work/90810/21 "2015-08-06T10:44:35Z")

</div>

I never machine or de-glaze. I deliberately run softer pads, on the premise that I’d sooner replace pads more often, and rotors less often. I figure warpage/runout would be noticeable/objectionable before there was a safety issue…so pad slap and replace rotors if and only if pulsing noticed. About all I do is an acetone wipe to get my greasy fingerprints off before my shakedown run. Also, I don’t have my rotors cut…when I price it out, parts store rotors are only marginally more expensive, and much less work.

Just for kicks-n-grins, I measured thickness, and I have about 0.035" excess on both rotors…

> Just to reiterate, in my experience, you'll get 20-30% better braking performance by replacing the rotors, even if they are not warped or damaged

Could you clarify? I have sufficient stopping power to lock wheels on dry pavement--so I don't understand a 20-30% stopping improvement, when the tire friction is the limiting factor.

---

<div class="post-metadata">

**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\
**Post date:** [August 7, 2015, 4:30am UTC](https://community.cartalk.com/t/brake-work/90810/22 "2015-08-07T04:30:37Z")

</div>

Like I said just in my experience but I have no data, just seems like much better braking after replacing rotors too. Plus I heard this some time ago from a mechanic quoting a publication. So suit yourself. Like I said, now I don’t use up brakes very fast so I tend to just swap everything out. In the old days I’d be doing brakes every year and tended to stretch the parts more.

---

<div class="post-metadata">

**Author:** ![Barkydog](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/barkydog/32/2470_2.png) [@Barkydog](https://community.cartalk.com/u/Barkydog)\
**Post date:** [August 7, 2015, 4:50am UTC](https://community.cartalk.com/t/brake-work/90810/23 "2015-08-07T04:50:03Z")

</div>

Both my brake jobs have been around the 80,000 mark. Last time the rotors were so rusted there was no option, but at 80000 I would still figure it is time to replace the rotors.

[Previous page](https://community.cartalk.com/t/brake-work/90810.md?page=1)
