# Brake problem

**URL:** <https://community.cartalk.com/t/brake-problem/23664>\
**Category:** Maintenance/Repairs\
**Created:** [December 20, 2008, 8:02pm UTC](https://community.cartalk.com/t/brake-problem/23664 "2008-12-20T20:02:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![disgruntled\_ranger](https://avatars.discourse-cdn.com/v4/letter/d/96bed5/32.png) [@disgruntled\_ranger](https://community.cartalk.com/u/disgruntled_ranger)\
**Post date:** [December 20, 2008, 8:02pm UTC](https://community.cartalk.com/t/brake-problem/23664/1 "2008-12-20T20:02:04Z")

</div>

Hello all! I have a 1991 Ford Ranger 2wd 4cyl. About two years ago I was having a problem with the pedal slowly going to the floor. I changed the master cylinder, the wheel cylinders, the proportioning valve, brake pads. Everything was bled properly, and the problem seemed to go away. Just a couple of weeks ago it started doing it again. So I put a new master cylinder in and bled the brakes over and over. and it still does this slow descent to the floorboard. I’m out of ideas… Help! Anyone!