# Blower fan for heating and a/c going on and off

**URL:** <https://community.cartalk.com/t/blower-fan-for-heating-and-a-c-going-on-and-off/77528>\
**Category:** Maintenance/Repairs\
**Tags:** dodge\
**Created:** [February 21, 2013, 7:35am UTC](https://community.cartalk.com/t/blower-fan-for-heating-and-a-c-going-on-and-off/77528 "2013-02-21T07:35:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hknight](https://avatars.discourse-cdn.com/v4/letter/h/b4bc9f/32.png) [@Hknight](https://community.cartalk.com/u/Hknight)\
**Post date:** [February 21, 2013, 7:35am UTC](https://community.cartalk.com/t/blower-fan-for-heating-and-a-c-going-on-and-off/77528/1 "2013-02-21T07:35:07Z")

</div>

The blower fan inside the truck blows just fine when you first start the truck but will cut off and not blow at all after a few minutes. Then it will cut back on after a minute or so. It does this off and on all the time. It seems if it were a fuse it would just cut off and not come back on. Any idea what it might be? Thanks for all help! This is a Dodge Ram 1500 Sport Edition.

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [February 21, 2013, 7:39am UTC](https://community.cartalk.com/t/blower-fan-for-heating-and-a-c-going-on-and-off/77528/2 "2013-02-21T07:39:07Z")

</div>

The next time the blower stops working, pull over and reach under the passenger side of the dash and tap on the blower motor with the handle of a screwdriver. If the blower starts working replace the blower motor.

Tester

---

<div class="post-metadata">

**Author:** ![Hknight](https://avatars.discourse-cdn.com/v4/letter/h/b4bc9f/32.png) [@Hknight](https://community.cartalk.com/u/Hknight)\
**Post date:** [February 21, 2013, 7:41am UTC](https://community.cartalk.com/t/blower-fan-for-heating-and-a-c-going-on-and-off/77528/3 "2013-02-21T07:41:45Z")

</div>

Thanks, I will try that tomorrow.
