# Bleeding brakes question. How do you know when it's flushed?

**URL:** <https://community.cartalk.com/t/bleeding-brakes-question-how-do-you-know-when-its-flushed/81463>\
**Category:** Maintenance/Repairs\
**Created:** [September 23, 2013, 5:50am UTC](https://community.cartalk.com/t/bleeding-brakes-question-how-do-you-know-when-its-flushed/81463 "2013-09-23T05:50:17Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![UsedEconobox\_2\_UsedBMW](https://avatars.discourse-cdn.com/v4/letter/u/8491ac/32.png) [@UsedEconobox\_2\_UsedBMW](https://community.cartalk.com/u/UsedEconobox_2_UsedBMW)\
**Post date:** [September 29, 2013, 12:44am UTC](https://community.cartalk.com/t/bleeding-brakes-question-how-do-you-know-when-its-flushed/81463/21 "2013-09-29T00:44:41Z")

</div>

**Open bleeder, press pedal down almost to floor, close bleeder. Take foot off of brake pedal and let it rise. Repeat. Move on to next wheel.**

Ok, so this HAS to be a 2 man job.  
Just to be 100% clear, this is how it will go…

Open bleeder.  
Press pedal down almost to floor (fluid comes out)  
Close bleeder.  
Take foot off of brake pedal and let it rise.

RE-Open bleeder.  
Press pedal down almost to floor (fluid comes out)  
Close bleeder.  
Take foot off of brake pedal and let it rise.

RE-Open bleeder.  
Press pedal down almost to floor (fluid comes out)  
Close bleeder.  
Take foot off of brake pedal and let it rise.

When you see new fluid come out:  
Close bleeder.  
Take foot off of brake pedal and let it rise.

Move to next wheel.  
Right?

---

<div class="post-metadata">

**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\
**Post date:** [September 29, 2013, 10:39am UTC](https://community.cartalk.com/t/bleeding-brakes-question-how-do-you-know-when-its-flushed/81463/22 "2013-09-29T10:39:01Z")

</div>

The sequence is right rear, then left front, then left rear, then right front.

---

<div class="post-metadata">

**Author:** ![galant](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@galant](https://community.cartalk.com/u/galant)\
**Post date:** [September 29, 2013, 10:08pm UTC](https://community.cartalk.com/t/bleeding-brakes-question-how-do-you-know-when-its-flushed/81463/23 "2013-09-29T22:08:14Z")

</div>

I always thought the sequence is from the furthest to the closest no matter what (ie the rears 1st).

---

<div class="post-metadata">

**Author:** ![bing](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/bing/32/4619_2.png) [@bing](https://community.cartalk.com/u/bing)\
**Post date:** [September 30, 2013, 5:29am UTC](https://community.cartalk.com/t/bleeding-brakes-question-how-do-you-know-when-its-flushed/81463/24 "2013-09-30T05:29:13Z")

</div>

That’s according to my manual. Yours may be different-haven’t looked at them all, but never seen the sequence of doing the rears first and then the fronts. I believe with the dual master cyl, they are crossed, not half for front and half for rear. That way you always have half a braking system if one fails.

---

<div class="post-metadata">

**Author:** ![db4690](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/db4690/32/2583_2.png) [@db4690](https://community.cartalk.com/u/db4690)\
**Post date:** [September 30, 2013, 7:56am UTC](https://community.cartalk.com/t/bleeding-brakes-question-how-do-you-know-when-its-flushed/81463/25 "2013-09-30T07:56:15Z")

</div>

@Bing

You are correct

[Previous page](https://community.cartalk.com/t/bleeding-brakes-question-how-do-you-know-when-its-flushed/81463.md?page=1)
