# Alarm goes off, no key fob to silence it

**URL:** <https://community.cartalk.com/t/alarm-goes-off-no-key-fob-to-silence-it/50999>\
**Category:** Maintenance/Repairs\
**Tags:** intrepid, dodge, alarm\
**Created:** [June 28, 2010, 4:55am UTC](https://community.cartalk.com/t/alarm-goes-off-no-key-fob-to-silence-it/50999 "2010-06-28T04:55:52Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![nowmaybe](https://avatars.discourse-cdn.com/v4/letter/n/8edcca/32.png) [@nowmaybe](https://community.cartalk.com/u/nowmaybe)\
**Post date:** [June 28, 2010, 4:55am UTC](https://community.cartalk.com/t/alarm-goes-off-no-key-fob-to-silence-it/50999/1 "2010-06-28T04:55:52Z")

</div>

I’ve had this '95 Dodge Intrepid for about six months. I have started it numerous times. Yesterday I ran it once, and locked the doors manually as usual. The power door locks do not ALL work. I may have hit the lock button. Sometimes I do out of habit. I don’t know if that makes a difference to the system. The next time I went to get into the car, the alarm went off, horn honking, lights flashing, you get the picture. I have a Jeep that did that once, and I got it to shut off by locking and unlocking the passenger front door rapidly three times. That didn’t work on the Dodge. I gave up and disconnected the battery. I hooked it up again a few minutes later, and it still honked. When it’s honking, it will start and run for maybe a second.  
  
  
  
 Is there a way to fix this without buying an expensive fob (or fobs) and having the dealer program it to the car?

---

<div class="post-metadata">

**Author:** ![transman618](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/transman618/32/24_2.png) [@transman618](https://community.cartalk.com/u/transman618)\
**Post date:** [June 28, 2010, 6:01am UTC](https://community.cartalk.com/t/alarm-goes-off-no-key-fob-to-silence-it/50999/2 "2010-06-28T06:01:44Z")

</div>

When my key FOB was messed up on my 06 Charger I would have to get in the vehicle and quickly put the key in the ignition and cycle the ignition switch on then off before the alarm would shut off.

transman

---

<div class="post-metadata">

**Author:** ![Cougar](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/cougar/32/21348_2.png) [@Cougar](https://community.cartalk.com/u/Cougar)\
**Post date:** [June 28, 2010, 8:56am UTC](https://community.cartalk.com/t/alarm-goes-off-no-key-fob-to-silence-it/50999/3 "2010-06-28T08:56:04Z")

</div>

With some Subarus at least, cycling the ignition 3 times will deactivate the alarm. To get a replacement keyfob for a good price look on Ebay for one. There are plenty for sale there.

---

<div class="post-metadata">

**Author:** ![nowmaybe](https://avatars.discourse-cdn.com/v4/letter/n/8edcca/32.png) [@nowmaybe](https://community.cartalk.com/u/nowmaybe)\
**Post date:** [June 28, 2010, 12:39pm UTC](https://community.cartalk.com/t/alarm-goes-off-no-key-fob-to-silence-it/50999/4 "2010-06-28T12:39:05Z")

</div>

Do they have to be programmed by the dealer, or are they self programming like a Ford of that era?
