# Airbag light on 97 F150 **URL:** \ **Category:** Maintenance/Repairs\ **Created:** [May 7, 2008, 2:00am UTC](https://community.cartalk.com/t/airbag-light-on-97-f150/13713 "2008-05-07T02:00:31Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Kruglerd](https://avatars.discourse-cdn.com/v4/letter/k/e19adc/32.png) [@Kruglerd](https://community.cartalk.com/u/Kruglerd)\ **Post date:** [May 7, 2008, 2:00am UTC](https://community.cartalk.com/t/airbag-light-on-97-f150/13713/1 "2008-05-07T02:00:31Z")
Ok, About 2 months ago I replaced the heater core on my 97 F150 (3 day task). Anyway, I ended up forgetting to plug in the harness to the steering wheel. So with 3 universals and some extensions, I ended up getting the wiring harness plugged in. However, the airbag light flashes a 3-2 code (Clockspring from what I can tell on the internet). Here’s my question, The horn still works, the cruise doesn’t. Is it possible that just re-seating the wiring harness would correct this, or is it most likely the clock spring. It’s odd that it would happen just as I put everything back together. What I’m looking for, is if I forgot to plug something back in, what location would this be in. If it is another wire somewhere, where is it typically located, or if it was a loose connection from the wiring harness, I should not have been able to drive the truck for the last few months. Any help is appreciated. Thanks in advance. ---
**Author:** ![Joseph\_E\_Meehan](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/joseph_e_meehan/32/21_2.png) [@Joseph\_E\_Meehan](https://community.cartalk.com/u/Joseph_E_Meehan)\ **Post date:** [May 7, 2008, 11:14am UTC](https://community.cartalk.com/t/airbag-light-on-97-f150/13713/2 "2008-05-07T11:14:19Z")
``` My guess it is the the wiring harness. Likely you did not get it back on correctly or a contact got bent in the process. Good Luck. ```