# Ac condenser

**URL:** <https://community.cartalk.com/t/ac-condenser/39450>\
**Category:** Maintenance/Repairs\
**Tags:** chrysler, concorde\
**Created:** [November 14, 2009, 1:30am UTC](https://community.cartalk.com/t/ac-condenser/39450 "2009-11-14T01:30:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cysidoro](https://avatars.discourse-cdn.com/v4/letter/c/e495f1/32.png) [@cysidoro](https://community.cartalk.com/u/cysidoro)\
**Post date:** [November 14, 2009, 1:30am UTC](https://community.cartalk.com/t/ac-condenser/39450/1 "2009-11-14T01:30:39Z")

</div>

I have a 96 chrysler concorde. The ac condenser got a whole in it and everything came out of it. How do you remove the condenser? What is the name of the tool to disconnect the tube? I have removed the clip from the ring but can’t disconnect the tube.

---

<div class="post-metadata">

**Author:** ![Caddyman](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/caddyman/32/23_2.png) [@Caddyman](https://community.cartalk.com/u/Caddyman)\
**Post date:** [November 14, 2009, 1:36am UTC](https://community.cartalk.com/t/ac-condenser/39450/2 "2009-11-14T01:36:47Z")

</div>

I believe the fittings just pull out…Nothing holding it except an O-ring, which you will need to replace…

---

<div class="post-metadata">

**Author:** ![Tester](https://sea1.discourse-cdn.com/cartalk/user_avatar/community.cartalk.com/tester/32/15976_2.png) [@Tester](https://community.cartalk.com/u/Tester)\
**Post date:** [November 14, 2009, 5:17pm UTC](https://community.cartalk.com/t/ac-condenser/39450/3 "2009-11-14T17:17:42Z")

</div>

Your local parts store should have a set of these AC line disconnect tools. [http://www.sjdiscounttools.com/lis37000.html](http://www.sjdiscounttools.com/lis37000.html) Without the tool the line can’t be disconnected.

Tester